Tools and Equipments

The Astro Tools 78912 Low Profile Ball Joint Separator is designed for tight access where most ball joint separators won't fit. This tool is partic...

The Astro Tools 78914 Lower Control Arm 4ft Pry Bar aids in getting ball-joints free from knuckles by using leverage to pull down on and free lower...

The Astro Tools 94222 13" 4pc Large Internal/ External Snap Ring Pliers are made of hardened chrome vanadium with a professional fit and finish. Th...

The Astro Tool 3018GR Digital Tire Inflator w/ Stainless Steel Hose & Push-Lock Coupler Chuck — Green is AAA battery powered with 4X the batter...

The Astro Tools 94410T 10pc 3/8" Drive Nano Impact Torx Bit Sockets are forged S2 alloy uniquely treated to provide superior resistance to twisting...

The Astro Tools EUROHE109 EuroPro High Efficiency/High Transfer Spray Gun with 1.9mm Nozzle & Plastic Cup maintains a higher transfer rate for ...

Provides 900 ft-lb maximum torque and 1,295 ft-lb of loosening torque Most powerful 1/2" impact in its class! Hard hitting twin hammer mechanism Du...

Provides 800 ft-lb maximum torque and 1,000 ft-lb of loosening torque. Hard hitting twin hammer mechanism delivers maximum power. Unique grip is er...

1,800 RPM .6 HP Motor Fitted with Jacobs® keyless chuck Feather trigger for better speed control Trigger mounted reverse for instant change of dire...

22,000 RPM .5 HP Motor Patented quiet tuned exhaust (82 dBA) Superior steel grade internal bearings for longer life Feather trigger for better spee...

22,000 RPM. Full 1.0 Horsepower non-stall motor. Patented quiet tuned exhaust (82 dBA). Quietest Die Grinder on the market. Superior steel grade in...

18,000 RPM .75 HP non stall motor Spindle lock feature for easy accessory change Speed control switch located at the top of the grip for added cont...

23,000 RPM .75 HP Non stall motor Spindle lock feature for easy accessory change Speed control switch located on top of the grip for added control ...

18,000 RPM 0.6 HP Motor provides non-stall operation Ergonomically designed composite grip provides unmatched comfort Low weight ergonomic composit...

2,600 stroke/minute motor provides fast cutting action in steel up to 18 gauge The 6330 has the smallest cut radius of any nibbler at only 3/16" al...

9,500 stroke/minute motor provides fast cutting action. .375 stroke length. The internal damping system reduces the vibration level to 2.5m/sec2, l...

Universal Saw Blade Air Saw with Quick C Part No.: 6355 Product Line: FLP Manufacturer: Aircat / Florida Pneumatic Part Status: A

3,500 RPM .6 HP Motor Low weight only 2.5 lbs. Low air consumption only 12.0 CFM Incorporates internal spindle thread for fitting of upholstery cle...

18,000 RPM Free Speed .5 HP Motor 3 Position Flex Head Cuts 3/8" rolled steel or 18 gauge steel sheet 360° Rotational guard and exhaust Patented mu...

Provides 950 ft-lb maximum torque and 1,300 ft-lb of loosening torque. The NITROCAT 1250-K is a fearless, hard hitting, 1/2" impact wrench that out...

3,000 Blows per minute for fast cutting action High performance and low weight Multi-patented muffler/exhaust system gives this tool and extremely ...

14,000 RPM. Full 1.0 HP motor eliminates "stall" and increases reliability. Extended length for better reach. Get in where other tools fail to go! ...

Low weight composite housing Top mounted one-hand Forward/Reverse switch Feather speed control trigger Internal silencing system reduces noise leve...

11,000 RPM 1 HP Motor eliminates "stall" and increases reliability Spindle lock for easy wheel change Speed control switch located at the top of th...