Dent

110V MAXI EXTENDED REPAIR STATION KIT Part No.: DF505EX110 Product Line: DEN Manufacturer: Dent Fix Equipment Part Status: A

220V MAXI EXTENDED REPAIR STATION KIT Part No.: DF505EX220 Product Line: DEN Manufacturer: Dent Fix Equipment Part Status: A

The DF-1667 boron killer, the only way to drill through Boron Steel is with this bit. This drill bit was created to specifically cut spot welds fro...

The DF-1690 Boron Killer®. The ONLY way to drill through Boron Steel is with this bit. This drill bit was created to specifically cut spot welds fr...

The DF-1465 bit is our 6.5 mm or approximately 1/4 in High Speed Steel Cobalt (HSCO) spot weld bit. The twist is smaller than the shank which is 8 ...

The DF-1480 bit is our 8 mm or approximately 5/16 in high speed steel cobalt (HSCO) spot-weld bit. The twist is the same size as the shank which is...

The DF-1610 bit is our 10 mm and the largest diameter high speed steel cobalt (HSCO) spot-weld bit we offer. The twist is larger than the shank whi...

The DF-1610T titanium coating on this bit will help prevent the bit from dulling due to overheating. The twist is the same size as the shank which ...

The DF-1680T is our most popular spot weld drill bit. 8 mm or 5/16 in is the most common size of spot welds that need to be removed. The titanium c...

The DF-1680TC titanium carbo nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twi...

Specifically designed for the rigors of spot weld drilling, the DF-1780 Germany made bits can be used with any 3/8 in drill. Centering nib prevents...

The DF-1780T is specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8 in drill. Centering ni...

The DF-3TC3A telescopic measuring tram is great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench ...

The DF-503 short welding rods are the replacement rods for the Maxi Multiple Pull Station DF-505/220V and DF-505/110V. Each welding rod is 5.5 inch...

(3) SHORT WELDING RODS FOR THE EAGLE Part No.: DF503E Product Line: DEN MFR Model: DF-503E Manufacturer: Dent Fix Equipment Brand: Dent Fix Equipm...

The DF-503L long welding rods are the replacement rods for the Maxi Multiple Pull Station DF-505/220V and DF-505/110V. Each welding rod is 10 inche...

The DF-503T trigger switch is a replacement part for the Maxi DF-505/220V or Hammerhead DF-595ii. Includes one (1) piece. Part No.: DF503T Product...

The DF-504 four-finger claw is ideal for hand pulling creases across a door. The unique finger design allows the deepest part of the panel to be pu...

The Dent Fix MAXI DF-505/220V is a 220 V single phase steel dent pulling station that provides the technician with the power they need to shrink, p...

Our nine-fingered claw, the DF-506, is designed for heavier panels and pulls that may require a slide hammer or power post. The pulling finger desi...

For crease pulling and other similar tasks. DF-507: 1 Lb thin "Wiggle Wire" .062 approx 60 pieces. Part No.: DF507 Product Line: DEN MFR Model: DF...

For Rocker Panels or other similar tasks. DF-507TK: 1Lb thick ''Wiggle Wire'' (3/32") .93mm approx 30 pieces. Made in the USA. Part No.: DF507TK P...

For crease pulling and other similar tasks. DF-508: 1/2Lb thin ''Wiggle Wire'' .062 approx 30 pieces. Made in the USA. Part No.: DF508 Product Lin...

For Rocker Panels or other similar tasks. DF-508TK: 1/2Lb thick ''Wiggle Wire'' .93 approx 15 pieces. Made in the USA. Part No.: DF508TK Product L...