SEM
SEM 62013 Custom Fill+ High Build Aerosol Blank 16 oz for 1K and 2K Primers
No reviews yet
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Custom Fill+ high build aerosol blanks provide higher film build and quicker coverage for 1K and 2K solvent primers, clear, and color.
Custom Fill+™ 62013 High Build Aerosol Blank is a 16 oz aerosol filler formulated for use with 1‑K solvent primers and 2‑K primers. It provides a high‑build, uniform base that can be sanded to a smooth finish before topcoat application.
The aerosol blank adheres to ABS, e‑coat, and primed substrates, delivering consistent coverage for panel repair and fill work. Its aerosol delivery ensures even distribution and rapid flash, allowing fast progression to sanding and subsequent coating steps.
Handle with appropriate personal protective equipment: eye protection, gloves, protective clothing, and a respirator are required. Use in a well‑ventilated area; the product is classified as flammable (flash point –97 °C) and presents acute toxicity, aquatic toxicity, and organ toxicity hazards. Follow H222, H280, H319, and H336 safety statements.
Why Pros Choose SEM SEM
- One SKU for all major solvent paint systems
- Superior basecoat and single stage hiding
- Shop floor (NESHAP) compliant
- Utilize your preferred primer, basecoat, or clear with your activator to ensure proper mix
- Professional spray pattern
- Consistent sprayout
- Comfort tip that eases finger fatigue
- No clean up, waste, or hazardous material generation
- 1K and 2K compatible
Compatibility
Compatible paint systems: Solvent, 2K, 1K, Basecoat.
Specifications
| Part No. | 62013 |
|---|---|
| Product Line | SEM |
| MFR Model | 62013 |
| Manufacturer | SEM |
| UPC | 646786620133 |
| Brand | Custom Fill+™ |
| Waterbourne (Y/N) | N |
| Component | 2K |
| Container Size (oz) | 16 |
- Compatible Substrates
- ABS, e‑coat, primer
About SEM
SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.
Frequently Asked Questions
What substrates can I apply Custom Fill+™ 62013 High Build Aerosol Blank to?
It is compatible with ABS, e‑coat coated surfaces, and existing primer layers.
What personal protective equipment is required when using this aerosol?
Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator suitable for organic vapors.
What are the primary safety hazards associated with this product?
GHS hazards include acute toxicity, aquatic toxicity, compressed gas, eye damage, flammability, organ toxicity, and reproductive toxicity (H222, H280, H319, H336).
What is the flash point of the aerosol?
The flash point is –97 °C, indicating a very low temperature ignition risk.
How should the aerosol be stored to maintain shelf life?
Store in a cool, dry place with adequate ventilation to preserve product integrity.
Documents & Safety
- Safety Data Sheet (SDS)
- customfill_62003_specification_sheet.pdf
- 62013%20Custom%20Fill+%20High%20BuildUSA.pdf
Signal word: Danger.
Personal protective equipment: wear safety goggles, chemical‑resistant gloves, protective clothing (coveralls or long sleeves), and a suitable respirator.
Key hazards: highly flammable aerosol; can cause serious eye injury; toxic if inhaled; may be harmful to aquatic life; potential organ and reproductive toxicity.
Always refer to the full SDS before use.
Personal protective equipment: wear safety goggles, chemical‑resistant gloves, protective clothing (coveralls or long sleeves), and a suitable respirator.
Key hazards: highly flammable aerosol; can cause serious eye injury; toxic if inhaled; may be harmful to aquatic life; potential organ and reproductive toxicity.
Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
This listing ships SEM in a 16 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SEM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SEM products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SEM is 62013. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
