SprayMax
SprayMax 1K Empty Fillclean Version 2 Clear 3682072 Aerosol Can
No reviews yet
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
For the filling of the specific color tone of solvent 1K base paints in the brands and qualities offered by the paint manufacturers (as follows). The result is a ready-to-use SPRAYMAX® 1K aerosol can filled with 1K solvent base basecoat. The best product and quality results are guaranteed.
Spraymax 1K Empty Fillclean Version 2 is a single‑component, low‑viscosity filler designed for rapid repair of dents, gouges, and surface imperfections on a wide range of automotive substrates. It is commonly used in body shop prep work where a fast‑setting, sandable filler is required before primer or topcoat application.
The formulation provides a flash time of 2 – 3 minutes, allowing technicians to shape and sand the material quickly while maintaining sufficient workability. It adheres to aluminum, e‑coat, galvanized steel, plastic, polyester, primer, and steel surfaces, eliminating the need for separate primers on many substrates. The low flash point of 0 °C (32 °F) without propellant underscores the material’s rapid curing characteristics.
Due to its acute toxicity, aspiration hazard, and classification as a carcinogen and skin corrosive, proper personal protective equipment is mandatory: eye protection, chemical‑resistant gloves, protective clothing, and a respirator. Use in a well‑ventilated area and follow the first‑aid guidelines outlined in the SDS.
Why Pros Choose SprayMax SPM
- For the filling of the specific color tone of solvent 1K base paints in the brands and qualities offered by the paint manufacturers (as follows). The result is a ready-to-use SPRAYMAX® 1K aerosol can filled with 1K solvent base basecoat. The best product and quality results are guaranteed.
How to Use
For 1K solvent based basecoats and primed surfaces
- Clean the substrate thoroughly; ensure it is free of dust, oil, and loose material. The product is approved for aluminum, e‑coat, galvanized, plastic, polyester, primer, and steel.
- Apply the coating by spray using the recommended spray equipment. Deposit a uniform thin coat.
- Allow a flash time of 2–3 minutes before applying additional coats or handling the part.
Compatibility
Compatible paint systems: Solvent, 1K, Basecoat.
Specifications
| Part No. | 3682072 |
|---|---|
| Product Line | SPM |
| MFR Model | 3682072 |
| Standard/Approvals | GHS02 | GHS04 | GHS07 |
| Application | For 1K solvent based basecoats and primed surfaces |
| Manufacturer | SprayMax, Peter Kwasny, Inc |
| UPC | 879910000239 |
| Brand | SprayMax® |
| Component | 1K |
| Color | Clear |
- Flash Time
- 2 - 3 min
- Substrates
- Aluminum, e‑coat, galvanized, plastic, polyester, primer, steel
About SprayMax
SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.
Frequently Asked Questions
What substrates can Spraymax 1K Empty Fillclean Version 2 be applied to?
It is compatible with aluminum, e‑coat, galvanized steel, plastic, polyester, primer‑coated surfaces, and standard steel.
How long is the flash time before the coating can be handled?
The flash time is 2–3 minutes under typical shop conditions.
What personal protective equipment is required when using this product?
Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator approved for aerosolized chemicals.
What are the primary hazards associated with Spraymax 1K Empty Fillclean?
The product is classified for acute toxicity, aspiration hazard, carcinogenicity, compressed gas, eye damage, flammability, oxidizer, reproductive toxicity, and skin corrosion.
Documents & Safety
- Safety Data Sheet (SDS)
- spraymax_3680080_catalog.pdf
- spraymax_3682071_specification_sheet.pdf
- SDSREZ188_3682072_20190731_EN.pdf
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
Most in-stock orders for SprayMax, Peter Kwasny, Inc SPM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SprayMax, Peter Kwasny, Inc products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SprayMax, Peter Kwasny, Inc SPM is 3682072. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
Order in multiples of
6
