Overview
Built for the job.
For the filling of the specific color tone of 2K single-stage topcoats in the brands and qualities offered by the paint manufacturers mentioned (as follows). The result is a ready-to-use SPRAYMAX® 2K aerosol can. The best product and quality results are guaranteed. In order to guarantee the filling of the 2K…
Spraymax 2K Empty Fill Clean Series H is a two‑component, high‑solids filler formulated for rapid repair of dents, scratches, and surface imperfections on a wide range of automotive substrates. It is designed for body shop technicians who need a dependable fill that can be sanded and primed without compromising the final paint finish.
The product offers a flash time of 2–3 minutes, allowing quick lay‑up and efficient workflow. Its compatibility includes aluminum, e‑coat, galvanized steel, plastic, polyester, primer, and standard steel, providing versatile application across most vehicle panels. The high‑solids formulation delivers substantial coverage per kilogram, reducing material waste and minimizing sanding time.
Due to the presence of acute toxicity, aspiration hazards, and flammable components, appropriate personal protective equipment is required: eye protection, chemical‑resistant gloves, protective clothing, and a respirator in a well‑ventilated area. Follow the safety data sheet for first‑aid procedures in case of inhalation, skin contact, eye exposure, or ingestion.
Why Pros Choose SprayMax SPM
- For the filling of the specific color tone of 2K single-stage topcoats in the brands and qualities offered by the paint manufacturers mentioned (as follows). The result is a ready-to-use SPRAYMAX® 2K aerosol can. The best product and quality results are guaranteed. In order to guarantee the filling of the 2K FillClean® with the new FillClean® filling equipment, the FillClean® caps are needed (Art. No. 990 246).
How to Use
For 2K single stage topcoats and primed surfaces, sanded, cleaned
- Clean and degrease the substrate (aluminum, e‑coat, galvanized, plastic, polyester, primer, steel) to remove all contaminants.
- Apply Spraymax 2K Empty Fill Clean Series H by spraying. Allow a flash time of 2–3 minutes before applying a subsequent coat if required.
Compatibility
Compatible paint systems: 2K, Single-Stage.
Specifications
| Part No. | 3680088 |
|---|---|
| Product Line | SPM |
| MFR Model | 3680088 |
| Standard/Approvals | GHS02 | GHS04 | GHS08 |
| Application | For 2K single stage topcoats and primed surfaces, sanded, cleaned |
| Manufacturer | SprayMax, Peter Kwasny, Inc |
| UPC | 879910000291 |
| Brand | SprayMax® |
| Maximum Sale Quantity | 18 |
| Maximum Sale Day | 7 |
| Component | 2K |
| Color | Clear |
- Flash Time
- 2 - 3 min
- Compatible Substrates
- Aluminum, e‑coat, galvanized, plastic, polyester, primer, steel
About SprayMax
SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.
Frequently Asked Questions
What substrates can Spraymax 2K Empty Fill Clean Series H be applied to?
It is compatible with aluminum, e‑coat, galvanized metal, plastic, polyester, primer, and steel.
How much working time do I have before the material begins to set?
The flash time is 2 – 3 minutes.
What personal protective equipment is required when using this product?
Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator.
What first‑aid steps should I follow if the product contacts my skin?
Immediately wash the area with plenty of water. If irritation or a rash develops, seek medical advice.
What first‑aid steps should I follow if the product gets into my eyes?
Rinse the eyes cautiously with water for several minutes, removing contact lenses if present.
Documents & Safety
- Safety Data Sheet (SDS)
- spraymax_3680080_catalog.pdf
- spraymax_3680080_specification_sheet.pdf
- SDSREZ264_3680088_20190731_EN.pdf
Danger – This product is a toxic, flammable aerosol that can cause serious eye injury, skin burns, respiratory irritation, and is classified as a carcinogen and reproductive hazard. Use safety glasses or goggles, chemical‑resistant gloves, protective clothing, and a suitable respirator when handling. Treat the container as a compressed gas and avoid inhalation, skin contact, and eye exposure. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
Most in-stock orders for SprayMax, Peter Kwasny, Inc SPM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SprayMax, Peter Kwasny, Inc products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SprayMax, Peter Kwasny, Inc SPM is 3680088. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
