Overview
Built for the job.
PURE WHITE GA. ACRY.ENAM.
This pure white acrylic enamel delivers professional-grade coverage for automotive refinishing applications. Formulated for spray application on properly prepared e-coat and OEM substrates, this single-stage coating provides durable color and gloss in one application step.
The coating achieves tack-free status in 15 to 20 minutes at 70°F, with recoat capability within 4 to 6 hours at the same temperature. Mixed at a ratio of 8 parts acrylic enamel, it maintains optimal spray viscosity at 13-15 seconds through a #4 Zahn cup. This formulation ensures consistent atomization and smooth film build across panels.
Always use appropriate respiratory protection and ensure adequate ventilation when spraying. Follow standard spray booth safety protocols and material handling procedures for solvent-based coatings.
Application Guide
- Ensure substrate is clean and properly prepared e-coat or OEM surface
- Mix 8 parts acrylic enamel according to manufacturer's complete mixing instructions
- Apply mixed material within pot life window (viscosity: 13-15 seconds #4 Zahn cup)
- Allow 15-20 minutes tack-free time at 70°F before handling
- Wait 4-6 hours at 70°F before applying additional coats if needed
Specifications
| Part No. | 30010 |
|---|---|
| Product Line | X-L |
| Manufacturer | X-L Products |
| UPC | 000050300105 |
| Rubberized | No |
- Mix Ratio
- 8 parts acrylic enamel
- Tack Free Time
- 15 to 20 minutes at 70°F
- Recoat Time
- 4 to 6 hours at 70°F
- Pot Life
- 13-15 sec #4 Zahn
- Compatible Substrates
- E-coat, OEM
About X-L Products
X-L Products is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What surfaces can I apply this acrylic enamel to?
This product is compatible with e-coat and OEM substrates, making it suitable for both factory-primed surfaces and original equipment manufacturer finishes.
What's the correct mix ratio for this enamel?
Use 8 parts acrylic enamel to achieve proper application consistency and performance characteristics.
How long should I wait between coats?
Allow 4 to 6 hours recoat time at 70°F before applying additional coats.
When will the surface be tack-free?
The coating will be tack-free in 15 to 20 minutes at 70°F, allowing for safe handling and masking removal.
What's the viscosity specification for spray application?
Target 13 to 15 seconds using a #4 Zahn cup for optimal spray characteristics and atomization.
Documents & Safety
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
Cure & dry schedule
Timing at 77°F
Pot life
6 to 12 hours
Tack-free
15 to 20 minutes at 70°F
Recoat
4 to 6 hours at 70°F
Dry hard
8 to 16 at 70°F
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
Most in-stock orders for X-L Products X-L ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of X-L Products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for X-L Products X-L is 30010. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.