Products

The DF-1680TC titanium carbo nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twi...

Specifically designed for the rigors of spot weld drilling, the DF-1780 Germany made bits can be used with any 3/8 in drill. Centering nib prevents...

The DF-1780T is specifically designed for the rigors of spot weld drilling, these Germany made bits can be used with any 3/8 in drill. Centering ni...

The DF-3TC3A telescopic measuring tram is great for writing estimates or to quickly spot check a frame pull. No need to set up a complicated bench ...

The DF-503 short welding rods are the replacement rods for the Maxi Multiple Pull Station DF-505/220V and DF-505/110V. Each welding rod is 5.5 inch...

(3) SHORT WELDING RODS FOR THE EAGLE Part No.: DF503E Product Line: DEN MFR Model: DF-503E Manufacturer: Dent Fix Equipment Brand: Dent Fix Equipm...

The DF-503L long welding rods are the replacement rods for the Maxi Multiple Pull Station DF-505/220V and DF-505/110V. Each welding rod is 10 inche...

The DF-503T trigger switch is a replacement part for the Maxi DF-505/220V or Hammerhead DF-595ii. Includes one (1) piece. Part No.: DF503T Product...

The DF-504 four-finger claw is ideal for hand pulling creases across a door. The unique finger design allows the deepest part of the panel to be pu...

The Dent Fix MAXI DF-505/220V is a 220 V single phase steel dent pulling station that provides the technician with the power they need to shrink, p...

Our nine-fingered claw, the DF-506, is designed for heavier panels and pulls that may require a slide hammer or power post. The pulling finger desi...

For crease pulling and other similar tasks. DF-507: 1 Lb thin "Wiggle Wire" .062 approx 60 pieces. Part No.: DF507 Product Line: DEN MFR Model: DF...

For Rocker Panels or other similar tasks. DF-507TK: 1Lb thick ''Wiggle Wire'' (3/32") .93mm approx 30 pieces. Made in the USA. Part No.: DF507TK P...

For crease pulling and other similar tasks. DF-508: 1/2Lb thin ''Wiggle Wire'' .062 approx 30 pieces. Made in the USA. Part No.: DF508 Product Lin...

For Rocker Panels or other similar tasks. DF-508TK: 1/2Lb thick ''Wiggle Wire'' .93 approx 15 pieces. Made in the USA. Part No.: DF508TK Product L...

The DF-509 is the essential accessory that raises the DF-505 MAXI up to hip level and provides storage space for all the accessories. The Z-bracket...

The DF-601A protects electronic components such as ABS, engine management systems, fuel injection systems, radios, alarms and other sensitive elect...

Medium 16mm replacement blades for the DF-608. Part No.: DF608M Product Line: DEN MFR Model: DF-608M Standard/Approvals: California Pro65 Warning ...

Product Description The DF-620TPS 12-piece set can easily and safely remove interior and exterior trim pieces. Helps remove air conditioning vents...

The Multi-Clip Pliers from Dent Fix Equipment are a great way to remove, pry, or cut tabs & clips. The specially designed curved head allows th...

The DF-700DX tool is so effective you will wonder what you ever did without it. With the Course brush, undercoating and seam sealer are stripped aw...

The DF-702C brush rides in an aluminum housing that permits the brushes to flex. This movement allows the brushes to compress in tight corners and ...

This brush is compatible with the DF-701 and DF-700DX Eliminator kit. Part No.: DF702F Product Line: DEN MFR Model: DF-702F Standard/Approvals: Ca...

23mm Hub for Eliminator Tool Part No.: DF702H23 Product Line: DEN MFR Model: DF-702H23 Standard/Approvals: California Pro65 Warning Manufacturer: ...