Transtar Autobody Technology
Transtar 6737 Fisheye Remover Clear 8 oz Twin Neck Bottle
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
TRANSTAR® Fisheye Remover is an additive specially formulated to help avoid and prevent fisheyes. Fisheye Remover can be used with virtually all types of urethane and non-urethane 2K topcoats. Use for a smooth finish over surfaces that show evidence of fisheying usually due to contamination. TDS 703.
TRANSTAR® 6737 Fisheye Remover is an 8 oz twin‑neck clear solvent formulated to eliminate fisheye defects in primer coats. It is intended for professional body shop applications where precise defect removal is required without compromising the underlying primer.
The formulation offers a low VOC content of 6.52 lb/gal (781 g/L) and a shelf life of one year, ensuring stable performance over typical inventory cycles. It is compatible with primer substrates, providing rapid wetting and penetration to release fisheyes while maintaining primer integrity. The clear base allows visual confirmation of coverage before removal.
Use requires standard PPE: eye protection, chemical‑resistant gloves, protective clothing, and a respirator. The product is classified with a “Warning” signal word and carries GHS hazards including acute toxicity, flammability, and carcinogenicity. Adequate ventilation and immediate first‑aid measures—fresh air for inhalation, thorough washing of skin and eyes—are mandatory.
Why Pros Choose Transtar Autobody Technology TRM
- 1/4 to 1/2 oz per sprayable quart mix ratio
- Prevents cratering and fisheyes
- Helps guard against silicone contamination
- Assures a smooth finish
Application Guide
Compatibility
Compatible paint systems: Urethane, 2K.
Specifications
| Part No. | 6737 |
|---|---|
| Product Line | TRM |
| MFR Model | 6737 |
| Standard/Approvals | GHS and OSHA Hazards |
| Manufacturer | Transtar Autobody Technology |
| UPC | 845505000113 |
| Brand | TRANSTAR® |
| Rubberized | No |
| Color | Clear |
| Container Size (oz) | 8 |
| Container Type | Twin Neck Bottle |
| Form | Liquid |
- VOC
- 6.52 #/gal (781 g/L)
- Shelf Life
- 1 year
- Compatible Substrates
- Primer
About Transtar Autobody Technology
Transtar Autobody Technology is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates can I apply TRANSTAR® 6737 Fisheye Remover to?
The remover is formulated for use on primer surfaces. It is compatible with cured primer coats prior to sanding or top‑coat application.
What personal protective equipment (PPE) is required when using this product?
Use eye protection, chemical‑resistant gloves, protective clothing, and a respirator approved for organic vapors. The product carries a “Warning” signal word and multiple GHS hazards, so full PPE is mandatory.
Can I sand and paint over the area after using the remover?
Yes. After the remover has fully evaporated from the primer, the surface can be sanded and subsequently painted according to normal body shop procedures.
How long does the product remain usable on the shelf?
The shelf life is 1 year when stored in its original, tightly sealed container.
Documents & Safety
Warning: This fisheye remover is flammable, toxic by inhalation, harmful to skin and eyes, carcinogenic, toxic to aquatic life, and an oxidizer. Use safety glasses or goggles, chemical‑resistant gloves, protective clothing, and a suitable respirator when handling. Avoid breathing vapors, skin contact, and eye exposure. Dispose of waste responsibly to protect the environment. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
This listing ships Transtar Autobody Technology TRM in a 8 container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for Transtar Autobody Technology TRM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of Transtar Autobody Technology products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for Transtar Autobody Technology TRM is 6737. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
