House of Kolor
House of Kolor KD3004-Q01 High/Medium-Build DTS Primer 1 qt Red
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the booth.
The KD3000 series is a hybrid epoxy, two component primer system, designed to be used as Direct to Substrate (DTS) high or medium build surfacer and sealer. Available in 6 colors, this primer series can be intermixed to produce a wide range of colors. The KD3000 series has excellent adhesion, corrosion resistance,…
HOUSE OF KOLOR® KD3004-Q01 is a high- to medium-build DTS primer surfacer/sealer formulated for automotive refinishing. It is supplied in a 1 qt can and is intended for use as the base layer on new or repaired panels before color application.
The product is mixed by gun setup and delivers low VOC emissions at 2.1 lb/gal (250 g/L), meeting strict compliance standards. Designed for three coats, it adheres to a wide range of substrates including aluminum, bare metal, e-coat, fiberglass, galvanized steel, OEM plastics, polyester, and existing primers. Its build allows efficient fill of minor imperfections while providing a uniform surface ready for topcoats.
Safety is paramount: the formulation carries a "Warning" signal word with acute toxicity, aspiration hazard, carcinogenic potential, oxidizer, and skin corrosion classifications. Use eye protection, chemical-resistant gloves, protective clothing, and a respirator in a well-ventilated area. Immediate first-aid measures include flushing eyes and skin and seeking medical attention for inhalation or ingestion.
Why Pros Choose House of Kolor High/Medium-Build
- Eliminate the need for the additional steps and products required to achieve optimal adhesion and corrosion resistance
- Cure as high build surfacer for contour sanding in under 2 hr at 70 deg F
- Cure as sealer for top coating in under 30 min at 70 deg F
- Prevent plastic filler staining or bleed through
- Greatly improves speed and accuracy of contour sanding when used as medium build
- Greatly reduces surface prep and consumption of abrasives due to smoothness of application
- Do not stain, shrink, or swell from sand scratches
Compatibility
Compatible substrates: Bare Steel, Steel, Aluminum, Galvanized, Fiberglass, Plastic.
Compatible paint systems: Epoxy.
Specifications
| Part No. | KD3004-Q01 |
|---|---|
| Product Line | HOK |
| MFR Model | KD3004.Q01 |
| Standard/Approvals | California Pro65 Warning: Cancer | OSHA Hazard |
| Manufacturer | House of Kolor |
| UPC | 806298451728 |
| Brand | HOUSE OF KOLOR® |
| Maximum Sale Quantity | 3 |
| Maximum Sale Day | 7 |
| Rubberized | No |
| Color | Red |
| Container Size (qt) | 1 |
| Container Type | Can |
| Form | Liquid |
| Type | High/Medium-Build |
| Mixing Ratio | 4:1:1 |
- Mix Ratio
- Gun setup
- VOC
- 2.1 lb/gal (250 g/L)
- Compatible Substrates
- Aluminum, bare metal, e-coat, fiberglass, galvanized, OEM, plastic, polyester, primer, steel
- Number of Coats
- 3
About House of Kolor
House of Kolor is the legendary custom paint brand for kandys, pearls, and base coats used by show car builders and custom painters.
Frequently Asked Questions
What substrates are compatible with this primer?
The KD3004-Q01 can be applied to aluminum, bare metal, e-coat, fiberglass, galvanized steel, OEM parts, plastic, polyester, existing primer, and steel.
What personal protective equipment is required when applying this product?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator as specified in the SDS.
How many coats are recommended for proper coverage?
The technical data recommends applying three coats of the KD3004-Q01 primer.
Documents & Safety
Warning - This primer contains chemicals that are acutely toxic, may irritate the respiratory tract if inhaled, and can cause skin and severe eye irritation or burns. It is also classified as a carcinogen and an oxidizer. Use safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls), and a suitable respirator when handling. Avoid breathing vapors, skin contact, and ingestion. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
House of Kolor HOK is compatible with Bare Steel, Steel, Aluminum, Galvanized, Fiberglass, Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships House of Kolor HOK in a 1 (QT) container. Check the autofxmart catalog for other sizes and bulk pricing.
House of Kolor HOK uses a mix ratio of 4:1:1. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.
Most in-stock orders for House of Kolor HOK ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of House of Kolor products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
