House of Kolor
House of Kolor UC35-G17 Topcoat Clearcoat 1 gal Can High Gloss Fast Drying
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: This product contains the following chemical(s) known to the State of California to cause birth defects or other reproductive harm.This product contains the following chemical(s) known to the State of California to cause
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the booth.
UC35 cosmic acrylic urethane Klear and can be mixed for use coast 2 coast UC35 may be used to topcoat any urethane enamel finish, including all HOUSE OF KOLOR® basecoats UC35 features high gloss and has a good chemical, fuel and water resistance A fast drying VOC compliant topcoat for any urethane or polyurethane…
HOUSE OF KOLOR® Kosmic Kolor® UC35-G17 is a single-component clearcoat designed for high-gloss finish work on e-coat primed panels. It provides the final protective layer in custom paint builds, delivering depth and clarity while sealing the underlying color system.
The clearcoat air-dries at 77 °F (25 °C) within 12-24 hours before sanding, allowing a rapid return to the sanding stage. Its flash point of 27 °C (81 °F) indicates safe handling under typical shop conditions, and it is formulated for direct application over e-coat substrates without additional primers.
Use requires standard PPE: eye protection, chemical-resistant gloves, protective clothing, and a respirator in well-ventilated areas. The product carries a "Warning" signal word and presents skin corrosion and respiratory irritation hazards, so adequate ventilation and immediate decontamination procedures are essential.
Why Pros Choose House of Kolor HOK
- Kosmic Acrylic Urethane Klear
Application Guide
- Clean the e-coat surface to remove any contaminants; ensure it is dry and free of oil or grease.
- Stir the Kosmic Kolor® UC35-G17 topcoat thoroughly. Mix according to the pot life indicated on the container before application.
- Apply the clearcoat with a spray gun using standard industry technique (e.g., 20-25 psi, 4-6 in. fan).
- Allow the coating to air dry at 77 °F for 12 - 24 hours before sanding or handling.
Compatibility
Compatible paint systems: Urethane, Enamel, Acrylic, Polyurethane, Basecoat, Clearcoat.
Specifications
| Part No. | UC35-G17 |
|---|---|
| Product Line | HOK |
| MFR Model | UC35.G17 |
| Standard/Approvals | California Pro65 Warning: This product contains the following chemical(s) known to the State of California to cause birth defects or other reproductive harm.This product contains the following chemical(s) known to the State of California to cause |
| Manufacturer | House of Kolor |
| Trade Mark | Kosmic Kolor® |
| UPC | 806298350014 |
| Brand | HOUSE OF KOLOR® |
| Maximum Sale Quantity | 4 |
| Maximum Sale Day | 7 |
| Rubberized | No |
| Container Type | Can |
| Form | Liquid |
| Container Size (gal) | 1 |
| Mixing Ratio | 2:1:1 |
- Mix Ratio
- pot life
- Dry Time
- air dry at 77°F for 12-24 hours before sanding
- Compatible Substrates
- e-coat
About House of Kolor
House of Kolor is the legendary custom paint brand for kandys, pearls, and base coats used by show car builders and custom painters.
Frequently Asked Questions
What substrates can I apply this clearcoat to?
The topcoat is formulated for use on e-coat (electrocoat) primed surfaces.
How long must the coating dry before it can be sanded?
Air dry at 77 °F (25 °C) for 12-24 hours before sanding.
What personal protective equipment is required when applying this product?
Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator as indicated on the SDS.
Can I sand or paint over this clearcoat after it has cured?
Yes. After the recommended 12-24 hour air-dry period, the surface can be sanded and recoated as needed.
Documents & Safety
Warning: This clearcoat has a low flash point of 27 °C (81 °F) and can ignite if exposed to an open flame or spark. It may cause skin irritation or corrosion, moderate eye irritation, respiratory tract irritation if inhaled, and irritation of the mouth, throat, and stomach if swallowed. Wear safety glasses or goggles, chemical-resistant gloves, protective clothing, and a suitable respirator when handling. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
Specifications
Full data
Frequently asked
Good to know
This listing ships House of Kolor HOK in a 1 (GL) container. Check the autofxmart catalog for other sizes and bulk pricing.
House of Kolor HOK uses a mix ratio of 2:1:1. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.
Most in-stock orders for House of Kolor HOK ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of House of Kolor products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for House of Kolor HOK is UC35-G17. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
