SprayMax
SprayMax 1K Spot Blender — 10.8
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California PROP65 Warning: Cancer
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships within 2 days
30-day returns
Overview
Built for the job.
Seamless edge transitions in the blending area Superior blending ability No color deviations Ideal for spot repairs 1K spot blender is a special product for homogenous paint transitions in the blending area of 2K clear coats as well as of single stage topcoats with outstanding blending results. The spot blender is…
SprayMax 1K Spot Blender is a one-component finishing product engineered for professional collision repair technicians. It is designed to smooth minor imperfections and blend edges on repaired panels, providing a uniform finish without the complexity of a two-component basecoat system. This product serves as a practical solution for spot repairs where full panel blending is not required, allowing technicians to maintain workflow efficiency.
Each aerosol can provides an approximate coverage of 5.4 square feet (0.5 square meters), ensuring precise application for localized areas. The product offers a stable shelf life of 60 months when stored at 70°F (20°C), making it a reliable inventory item for body shops. Its one-component formulation simplifies the application process, reducing setup time and waste during the finishing stages of paint correction.
Safety protocols must be observed during application. The SDS classifies this product as a flammable compressed gas with potential for eye damage, skin corrosion, and respiratory hazards. Technicians must utilize appropriate PPE, including eye protection, gloves, protective clothing, and a respirator. Ensure adequate ventilation in the spray booth to mitigate exposure to hazardous vapors and particulates.
Why Pros Choose SprayMax SPM
- 1K spot blender is a special product for homogenous paint transitions in the blending area of 2K clear coats as well as of single stage topcoats with outstanding blending results. The spot blender is used immediately after the clear/topcoat is applied.
Application Guide
- Ensure substrate is at 70 °F (20 °C).
- Apply to the repaired area to blend with surrounding finish.
Compatibility
Compatible paint systems: 2K, 1K.
Specifications
| Part No. | 3680093 |
|---|---|
| Product Line | SPM |
| MFR Model | 3680093 |
| Standard/Approvals | California PROP65 Warning: Cancer |
| Manufacturer | SprayMax, Peter Kwasny, Inc |
| UPC | 879910000215 |
| Brand | SprayMax® |
| Rubberized | No |
| Container Size (oz) | 10.8 |
| Container Type | Aerosol Can |
| Form | Liquid |
- Coverage
- approx. 5.4 sq ft (0.5 m²) / aerosol can
- Shelf Life
- 60 months at 70 °F (20 °C)
About SprayMax
SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.
Frequently Asked Questions
What is the coverage rate per can?
One aerosol can provides approximately 5.4 sq ft (0.5 m²) of coverage.
What PPE is required when using this product?
You must wear eye protection, gloves, protective clothing, and a respirator. The SDS lists hazards including eye damage, skin corrosion, and flammability.
What is the shelf life of this product?
The shelf life is 60 months when stored at 70 °F (20 °C).
What should I do if this product contacts eyes or skin?
If in eyes, rinse cautiously with water for several minutes and remove contact lenses if present. If on skin, wash with plenty of water. If inhaled, move the victim to fresh air and keep them at rest in a position that eases breathing.
Documents & Safety
Warning: This product is a toxic, flammable, pressurized aerosol that can cause severe eye damage, skin burns, respiratory irritation, and is classified as a carcinogen and reproductive hazard. Use eye protection, chemical‑resistant gloves, protective clothing, and a suitable respirator when handling. Treat it as a fire and oxidation risk and avoid inhalation or skin contact. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — orders ship within 2 business days, lower 48 only.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
This listing ships SprayMax, Peter Kwasny, Inc SPM in a 10.8 container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SprayMax, Peter Kwasny, Inc SPM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SprayMax, Peter Kwasny, Inc products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SprayMax, Peter Kwasny, Inc SPM is 3680093. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
