Fusor 108B 2-Part Medium Bonding Adhesive, 7.6 oz Cartridge, Green, Paste, 4 hr
Fusor® 108B adhesive is a two-component, acrylic based metal bonding adhesive offering faster cure time than typical panel bonding adhesives. Fusor® 108B/109B adhesive can be used for panel bonding, weld bonding and rivet bonding of properly prepared quarter panels, rear body panels, roof panels, door skins,…
Fusor® 108B is a two-part medium bonding adhesive designed for structural bonding applications in automotive collision repair. This green paste adhesive comes in a convenient 7.6 oz cartridge for precise dispensing and consistent mixing ratios. The medium viscosity formula provides excellent gap-filling properties while maintaining structural integrity for panel bonding and reinforcement applications.
This adhesive bonds effectively to multiple automotive substrates including aluminum, e-coat, galvanized steel, primer, and standard steel surfaces. With a 4-hour cure time, Fusor® 108B allows sufficient working time for complex repairs while providing reliable structural strength once fully cured. The paste consistency prevents sagging on vertical surfaces and ensures proper adhesion in various repair configurations.
Why Pros Choose LORD Fusor Adhesives 2-Part, Medium
- Snap cure provides fast room temperature cure, resulting in reduced cycle times
- Versatile bonds a variety of metal, including bare metal, steel and aluminum, no welding required, can be riveted and resistance welded
- Environmentally resistant - Acrylic chemistry provides excellent corrosion protection over epoxy adhesives
- Guaranteed corrosion protection
- No welding required
How to Use
For quarter panels, rear body panels, roof panels, door skins, van side panels, outer truck bed panels
- Clean and prepare substrate surfaces (aluminum, e-coat, galvanized, primer, or steel) to remove contaminants and ensure proper adhesion
- Load cartridge into dispensing gun and mix adhesive components according to manufacturer's 2-part system requirements
- Apply paste adhesive to one or both surfaces as needed for the bonding application
- Join substrates and clamp or fixture as required during 4-hour curing process
- Allow full cure time before subjecting bond to service loads
Compatibility
Compatible substrates: Bare Metal, Steel, Aluminum.
Compatible paint systems: Epoxy, Acrylic.
Specifications
| Part No. | 108B |
|---|---|
| Product Line | FUS |
| MFR Model | 108B |
| Standard/Approvals | GHS Hazard |
| Application | For quarter panels, rear body panels, roof panels, door skins, van side panels, outer truck bed panels |
| Manufacturer | LORD Fusor Adhesives |
| UPC | 66623390969 |
| Brand | Fusor® |
| Applicable Materials | Steel and Aluminum |
| Composition | 30 to 35% Methyl Methacrylate, 1 to 5% Methacrylate Blend, 1 to 5% Methacrylate Phosphate Ester, 1 to 5% Methacrylic Acid, 0.1 to 0.9%Crystalline Silica, 0.1 to 0.9% N,N-Dimethylaniline, 0.1 to 0.9% Methacrylate Monomer (Part A), 25 to 30% Epoxy Resin, 1 to 5% Dicyclohexyl Phthalate, 1 to 5% Benzoyl Peroxide, 1 to 5% Dibutyl Phthalate, 0.1 to 0.9% Crystalline Silica (Part B) |
| Application Time | 40 min at 70 deg F |
| Component | 2K |
| Odor/Scent | Mild |
| Color | Green |
| Setting Time | 2 hr at 70 deg F |
| Flash Point | 201 deg F |
| Container Size (oz) | 7.6 |
| Container Type | Cartridge |
| Form | Paste |
| Type | 2-Part, Medium |
| Curing Time | 4 hr at 70 deg F |
- Product Type
- 2-Part Medium Bonding Adhesive
- Package Size
- 7.6 oz Cartridge
- Color
- Green
- Consistency
- Paste
- Cure Time
- 4 hours
- Compatible Substrates
- Aluminum, E-coat, Galvanized, Primer, Steel
About LORD Fusor Adhesives
LORD Fusor Adhesives is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What surfaces can I use this adhesive on?
Fusor 108B bonds to aluminum, e-coat, galvanized metal, primer, and steel substrates, making it suitable for most common auto body repair applications.
How long does this adhesive take to cure?
This medium bonding adhesive has a 4-hour curing time for full cure completion.
What's the cartridge size and how is it dispensed?
The adhesive comes in a 7.6 oz cartridge with a paste consistency that can be dispensed through standard dual-cartridge dispensing equipment.
Documents & Safety
- Safety Data Sheet (SDS)
- Technical Data Sheet (TDS)
- fusor_517_catalog.pdf
- fusor_108b_specification_sheet.pdf
- FUSOR_108B_109B_METAL_BONDING_ADH_PT_A_0.pdf
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.