Overview
Built for the job.
Excellent corrosion protection Fast drying Welding certificate Can be over coated with all solvent-based and waterborne base coats and 2K top coat systems Can be used as a wash primer with good adhesion properties or as a filler primer with good filling volume depending on-the thickness of application. Ideal for…
SprayMax 1K Self Etch Primer in gray is a single‑component, low‑odor primer formulated for rapid adhesion on a wide range of body shop substrates. It is intended for use as a base coat before topcoats on aluminum, e‑coat, galvanized steel, plastic, polyester, existing primer, and plain steel surfaces.
The primer offers a flash time of 2‑3 minutes, allowing fast re‑coat cycles while maintaining good film build and corrosion resistance. Its zero VOC formulation meets strict environmental requirements without sacrificing performance, and the gray tint provides excellent coverage for uniform finish preparation.
Because the product is classified with a “Warning” signal word and includes acute toxicity, carcinogen, and flammable hazards, technicians must wear eye protection and a suitable respirator, and work in a well‑ventilated area. Follow the SDS for detailed first‑aid procedures.
Why Pros Choose SprayMax SPM
- Can be used as a wash primer with good adhesion properties or as a filler primer with good filling volume depending on-the thickness of application. Ideal for subsequent waterborne base-coats.
How to Use
For subsequent waterborne basecoats
- Clean and degrease the substrate; ensure the surface is free of oil, wax, and loose material.
- Apply a uniform coat of 1K Self Etch Primer Gray using a spray gun at the recommended pressure.
- Allow the primer to flash for 2–3 minutes before handling or applying additional coats.
- After flash, inspect for coverage; if a second coat is required, repeat steps 2‑3.
Compatibility
Compatible substrates: E-Coat.
Compatible paint systems: Waterborne, Solvent, 2K, 1K.
Specifications
| Part No. | 3680003 |
|---|---|
| Product Line | SPM |
| MFR Model | 3680003 |
| Standard/Approvals | GHS02, GHS04, GHS07, GHS08 Hazard | OSHA Hazard | California Pro65 Warning: This Product Can Expose You to Ethylbenzene, Which Causes Cancer |
| Application | For subsequent waterborne basecoats |
| Manufacturer | SprayMax, Peter Kwasny, Inc |
| UPC | 879910000031 |
| Brand | SprayMax® |
| Solids Content | 23.6% |
| Color | Light Gray |
| Container Size (oz) | 11.2 |
| Coverage (sq-ft) | 5.4 to 8.1 |
- Flash Time
- 2‑3 min
- VOC
- 0 g/L
- Substrates
- Aluminum, e‑coat, galvanized, plastic, polyester, primer, steel
About SprayMax
SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.
Frequently Asked Questions
What substrates can I apply 1K Self Etch Primer Gray to?
The primer is compatible with aluminum, e‑coat, galvanized steel, plastic, polyester, existing primer, and steel surfaces.
How long is the flash time before I can handle the coated part?
Flash time is 2 – 3 minutes under typical shop conditions.
What personal protective equipment is required when spraying this product?
Use eye protection and a respirator approved for organic vapors and aerosols.
Is this primer low in volatile organic compounds?
Yes, it is listed as 0 VOC.
What are the main hazards associated with this primer?
The product carries a “Warning” signal word and is classified for acute toxicity, aspiration hazard, carcinogenicity, compressed gas, eye damage, flammability, oxidizer, reproductive toxicity, and skin corrosion.
Documents & Safety
- Safety Data Sheet (SDS)
- spraymax_3680001_catalog.pdf
- spraymax_3680003_specification_sheet.pdf
- SDSREZ931_3680003_20190731_EN.pdf
Warning: This 1K Self Etch Primer contains hazardous chemicals. Wear safety glasses or goggles and a suitable respirator at all times. The material is toxic if inhaled, may cause lung irritation and aspiration, is classified as a carcinogen, and can corrode skin and damage eyes. It is also flammable, acts as an oxidizer, and poses reproductive hazards. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
SprayMax, Peter Kwasny, Inc SPM is compatible with E-Coat. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships SprayMax, Peter Kwasny, Inc SPM in a 11.2 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SprayMax, Peter Kwasny, Inc SPM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SprayMax, Peter Kwasny, Inc products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SprayMax, Peter Kwasny, Inc SPM is 3680003. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
