US Chemical & Plastics
USC 32035 Red Glazing Putty 1 lb Paste/Gel Tube
No reviews yet
Hazardous material · Paste
This hazardous material ships ground-only. A handling surcharge may be added at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer and Reproductive Harm
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Red Glazing Putty is a one component, fast-drying glazing putty ideal for use under lacquer, acrylic, and synthetic finishes. The extremely fine texture of Red Glazing Putty fills pinholes, scratches and dimples on bare metal and hardened plastic fillers.
USC® 32035 Red Glazing Putty is a ready‑to‑use paste/gel formulated for high‑quality red finishes on automotive panels. It is designed for quick touch‑up, color‑matching, and final glaze applications where a uniform, deep‑red appearance is required.
The putty reaches a tack‑free state in 30 minutes when applied to a thickness of 1/32 in. or less, allowing rapid re‑work and sanding. It adheres to a broad range of substrates, including aluminum, bare metal, OEM surfaces, plastics, and primed panels, providing consistent coverage without additional bonding agents. The formulation contains 450 g/L VOCs, delivering a balance of performance and regulatory compliance.
Because the product is classified with a “Warning” signal word and includes hazards such as acute toxicity, skin corrosion, and flammability, proper personal protective equipment is mandatory. Use eye protection, chemical‑resistant gloves, protective clothing, and a respirator in a well‑ventilated area. The estimated flash point is 40 °F (4.4 °C), so keep away from ignition sources.
Why Pros Choose US Chemical & Plastics USC
- Best under lacquer, acrylic and synthetic finishes
- Good adhesion, easy sanding, minimal shrinking
How to Use
For use to repairs scratches, pinholes and other imperfections both over and under primer
- Clean the substrate (aluminum, bare metal, OEM, plastic, or primed surface) to remove grease, oil, and loose particles; ensure the surface is dry.
- Use the product directly from the tube – it is ready‑to‑use and requires no mixing.
- Apply a thin, even coat with a putty knife or spatula, spreading to a thickness of 1/32 inch (0.8 mm) or less.
- Allow the coat to dry for approximately 30 minutes at ambient temperature before handling or applying additional coats.
- If a second coat is required for coverage, repeat steps 3‑4, allowing 30 minutes drying between coats.
Compatibility
Compatible substrates: Bare Metal, Plastic.
Compatible paint systems: Lacquer, Acrylic.
Specifications
| Part No. | 32035 |
|---|---|
| Product Line | USC |
| MFR Model | 32035 |
| Standard/Approvals | California Pro65 Warning: Cancer and Reproductive Harm |
| Application | For use to repairs scratches, pinholes and other imperfections both over and under primer |
| Manufacturer | US Chemical & Plastics |
| UPC | 037307320357 |
| Brand | USC® |
| Maximum Sale Quantity | 12 |
| Maximum Sale Day | 7 |
| Color | Iron Oxide Red |
| Form | Paste/Gel |
| Container Type | Tube |
- Mix Ratio
- Ready to use
- Dry Time
- 30 minutes (1/32″ or less)
- VOC
- 450 g/L
- Compatible Substrates
- Aluminum, bare metal, OEM, plastic, primer
About US Chemical & Plastics
US Chemical & Plastics is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates can I apply USC® 32035 Red Glazing Putty to?
It is compatible with aluminum, bare metal, OEM finishes, plastic, and primed surfaces.
How long does the putty take to dry?
Dry time is approximately 30 minutes for a film thickness of 1/32 inch or less.
What personal protective equipment is required when using this product?
Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator as recommended in the SDS.
Can I sand and paint over the cured putty?
Yes. Once fully cured, the putty can be sanded to the desired finish and painted over.
Documents & Safety
Signal Word: Warning.
Personal protective equipment required: safety glasses or goggles, chemical‑resistant gloves, protective clothing (coveralls or apron), and a respirator suitable for organic vapors.
Key hazards: toxic if inhaled or swallowed, may cause serious eye damage and skin burns, flammable, harmful to aquatic environments, suspected carcinogen, and may affect reproductive health.
Always refer to the full SDS before use.
Personal protective equipment required: safety glasses or goggles, chemical‑resistant gloves, protective clothing (coveralls or apron), and a respirator suitable for organic vapors.
Key hazards: toxic if inhaled or swallowed, may cause serious eye damage and skin burns, flammable, harmful to aquatic environments, suspected carcinogen, and may affect reproductive health.
Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Wash and dry the panel; mask delicate trim.
2Apply a small amount of product to the pad.
3Work in sections at moderate speed and pressure.
4Wipe the residue with a clean microfiber.
5Step to a finer polish to remove any haze.
Specifications
Full data
Frequently asked
Good to know
US Chemical & Plastics USC is compatible with Bare Metal, Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
Most in-stock orders for US Chemical & Plastics USC ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of US Chemical & Plastics products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for US Chemical & Plastics USC is 32035. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
