SprayMax
SprayMax Hot Rod Satin Black — 12
No reviews yet
WARNING: Cancer & Reproductive Harm
California PROP65 WARNING: This product contains the following chemical(s) known to the State of California to cause birth defects or other reproductive harm. This product contains the following chemical(s) known to the State of California to cause c....
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Easy to use High quality two-component coating Very good flow Highest chemical and weather resistance Long-lasting and very durable finish For small damage repair jobs on existing semi gloss hot rod black parts/surfaces or for an easy and fast paint job of a new or restored part.
2K Hot Rod Satin Black is a two‑component polyurethane clearcoat designed for high‑gloss satin finishes on automotive body panels. It is optimized for quick turnaround repairs and custom paint jobs where a durable, UV‑stable satin black appearance is required.
Flash time ranges from 2 to 3 minutes, allowing rapid recoat cycles while maintaining excellent flow and level. The formulation adheres to a broad range of substrates, including aluminum, e‑coat, galvanized steel, plastic, polyester, primer, and steel, ensuring consistent coverage across most repair scenarios. The clearcoat provides a hard, chemical‑resistant film that meets industry standards for durability and color retention.
Use in a well‑ventilated area and wear appropriate PPE: eye protection, chemical‑resistant gloves, protective clothing, and a respirator meeting organic vapor filtration requirements. Follow standard first‑aid procedures for inhalation, skin, and eye exposure as outlined in the SDS.
Why Pros Choose SprayMax SPM
- For small damage repair jobs on existing semi gloss hot rod black parts/surfaces or for an easy and fast paint job of a new or restored part.
How to Use
For metal, steel, stainless steel and aluminum
- Thoroughly clean the target surface (aluminum, e‑coat, galvanized, plastic, polyester, primer, or steel) to remove grease, oil, and contaminants; sand or blast as required to achieve a sound, dry substrate.
- Apply the 2K Hot Rod Satin Black using a conventional HVLP/air‑spray gun, maintaining proper gun pressure and spray pattern.
- Allow each coat to flash for 2–3 minutes before applying the next coat. Typically 2–3 light coats are sufficient for full coverage.
- After the final coat, permit the finish to cure according to ambient conditions (no specific cure time provided).
Compatibility
Compatible paint systems: 2K.
Specifications
| Part No. | 3680212 |
|---|---|
| Product Line | SPM |
| MFR Model | 3680212 |
| Standard/Approvals | California PROP65 WARNING: This product contains the following chemical(s) known to the State of California to cause birth defects or other reproductive harm. This product contains the following chemical(s) known to the State of California to cause c.... |
| Application | For metal, steel, stainless steel and aluminum |
| Manufacturer | SprayMax, Peter Kwasny, Inc |
| UPC | 879910000444 |
| Brand | SprayMax® |
| Color | Black |
| Container Size (oz) | 12 |
| Finish | Satin |
- Flash Time
- 2 - 3 min
- Compatible Substrates
- Aluminum, e‑coat, galvanized, plastic, polyester, primer, steel
About SprayMax
SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.
Frequently Asked Questions
What substrates can I apply 2K Hot Rod Satin Black to?
The coating is compatible with aluminum, e‑coat, galvanized steel, plastic, polyester, primer, and plain steel surfaces.
What is the flash time for this product?
The flash time is 2 – 3 minutes under recommended spraying conditions.
What personal protective equipment is required when using this spray?
Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator approved for organic vapors.
What are the primary hazards associated with 2K Hot Rod Satin Black?
The product is classified with a “Warning” signal word and carries GHS hazards for acute toxicity, aquatic toxicity, eye damage, flammability, organ toxicity, oxidizer properties, and reproductive toxicity.
What first‑aid measures should I take if exposure occurs?
Inhalation: move the person to fresh air and keep them comfortable for breathing.
Skin contact: wash the affected area with plenty of water.
Eye contact: rinse the opened eye under running water for several minutes.
Documents & Safety
- Safety Data Sheet (SDS)
- spraymax_3680080_catalog.pdf
- spraymax_3680212_specification_sheet.pdf
- SDSREZ534_3680212_20190731_EN.pdf
Warning: This 2K Hot Rod Satin Black spray contains flammable solvents and toxic chemicals. Wear safety glasses or goggles, chemical‑resistant gloves, protective clothing, and a respirator with appropriate filter. The product can cause severe eye damage, skin irritation, respiratory distress if inhaled, and poses fire and explosion risks. It is hazardous to aquatic life, can affect internal organs and reproductive health, and acts as an oxidizer. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
This listing ships SprayMax, Peter Kwasny, Inc SPM in a 12 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SprayMax, Peter Kwasny, Inc SPM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SprayMax, Peter Kwasny, Inc products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SprayMax, Peter Kwasny, Inc SPM is 3680212. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
