U-POL
U-POL Trim #11 UP0880 High Build Top Coat 450 ml Aerosol Metallic Steel
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer and Reproductive Harm
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Bonds directly to bare steel, aluminum trim flexible plastics and existing paint surfaces Replicates factory look in one coat, drying to a truer black than competitive trim black aerosols
U-POL Trim #11 UP0880 is a high-build metallic steel topcoat supplied in a 450 mL aerosol can. It is designed for single-stage or clear-coat finish work on automotive trim and body panels where a durable, glossy metallic appearance is required.
The formulation provides up to 48.4 sq-ft coverage per unit when applied at the recommended temperature of 68 °F. One to two coats deliver full opacity and depth of color on compatible substrates including aluminum, OEM plastics, steel, and other typical body shop materials. The aerosol delivery ensures consistent flash time and even film thickness for efficient touch-up or panel-level repairs.
Safety precautions are critical: the product has a flash point of -41 °C and is classified with multiple GHS hazards (acute toxicity, flammable, eye damage, etc.). Use in a well-ventilated area while wearing eye protection, chemical-resistant gloves, protective clothing, and an appropriate respirator. Follow H-statements H222, H225, H226, H229, H302, H304, H312, H315 for handling and emergency response.
Why Pros Choose U-POL UPO
- Bonds directly to bare steel, aluminum trim flexible plastics, and existing paint surfaces
- Replicates factory look in one coat, drying to a truer black than competitive trim black aerosols
- Restores original appearance to body panels, under hood, chassis and wheels
- Excellent pigment density, essentially single coat coverage
Application Guide
- Clean the surface of aluminum, OEM parts, plastic, or steel and remove all grease, oil, and loose material; sand to a smooth finish appropriate for top-coat application.
- Verify that ambient temperature is at least 68 °F before beginning work.
- Shake the 450 mL aerosol can thoroughly (approximately 30 seconds) to ensure uniform pigment dispersion.
- Apply 1-2 coats of U-POL® Trim #11 High Build Top Coat using a consistent spray pattern, maintaining the recommended distance from the substrate.
Compatibility
Compatible substrates: Bare Steel, Steel, Aluminum, Plastic.
Specifications
| Part No. | 0880 |
|---|---|
| Product Line | UPO |
| MFR Model | UP0880 |
| Standard/Approvals | GHS02, GHS07, GHS08 Hazard | California Pro65 Warning: Cancer and Reproductive Harm |
| Manufacturer | U-POL |
| Trade Mark | Trim #11 |
| UPC | 501079610986 |
| Brand | U-POL® |
| Rubberized | No |
| Color | Steel |
| Container Type | Aerosol Can |
| Form | Liquid |
| Finish | Metallic |
- Application Temp.
- 68 °F
- Coverage
- 48.4 sq-ft per unit
- Compatible Substrates
- Aluminum, OEM, Plastic, Steel
- Number of Coats
- 1-2
About U-POL
U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.
Frequently Asked Questions
What substrates can U-POL Trim #11 be applied to?
It is compatible with aluminum, OEM-finished parts, plastic, and steel.
How much area does one aerosol can cover?
One 450 mL can provides approximately 48.4 sq ft of coverage.
What personal protective equipment is required when spraying this topcoat?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors.
At what temperature should I apply the coating?
The recommended application temperature is 68 °F (20 °C).
Documents & Safety
Signal word: Danger.
Required personal protective equipment: safety goggles or face shield, chemical-resistant gloves, flame-retardant coveralls or lab coat, and a suitable respirator for organic vapors.
Key hazards: highly flammable aerosol; can cause severe eye damage, skin burns, and respiratory irritation; toxic if inhaled, swallowed, or absorbed through the skin; harmful to aquatic life and may be carcinogenic.
Always refer to the full SDS before use.
Required personal protective equipment: safety goggles or face shield, chemical-resistant gloves, flame-retardant coveralls or lab coat, and a suitable respirator for organic vapors.
Key hazards: highly flammable aerosol; can cause severe eye damage, skin burns, and respiratory irritation; toxic if inhaled, swallowed, or absorbed through the skin; harmful to aquatic life and may be carcinogenic.
Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
Cure & dry schedule
Timing at 77°F
Flash
3 -5 mins
Dust free
20 - 30 minutes
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
U-POL UPO is compatible with Bare Steel, Steel, Aluminum, Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
Most in-stock orders for U-POL UPO ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of U-POL products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for U-POL UPO is 0880. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
