U-POL
U-POL RAPTOR 4879 1K Truck Bed Coating 14.3 oz Aerosol Black 8.6 sq-ft Coverage
No reviews yet
Hazardous material · Aerosol
Aerosol hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
RAPTOR 1K truck bed coating is ideal for protecting truck beds and other vehicle surfaces from impact, scratches, corrosion and water damage. Its 1K formulation gives a durable, abrasion-resistant finish with excellent adhesion to metal, aluminum, fiberglass, plastic and wood. With its clog-free nozzle it is…
U-POL RAPTOR® 4879 1K Truck Bed Coating is a high-solids aerosol finish formulated for durable, matte black protection of truck beds and other exterior surfaces. The 14.3 oz can delivers approximately 8.6 sq-ft per coat on properly prepared substrate.
Designed for use at 20 °C (70 °F), the coating adheres to a wide range of substrates including aluminum, steel, fiberglass, wood, OEM paint, e-coat, plastic, primer and SMC. With a VOC content of 545 g/L (4.5 lb/gal), it meets low-emission requirements while providing a tough, chemical-resistant film.
Safety is critical: the product carries a "Warning" signal word and multiple GHS hazards (including acute toxicity, flammability, and respiratory irritation). Apply in a well-ventilated area using eye protection, gloves, protective clothing, and a respirator. Follow first-aid procedures for inhalation, skin contact, eye exposure, or ingestion as outlined in the SDS.
Why Pros Choose U-POL UPO
- Durable, impact and abrasion-resistant 1K coating
How to Use
For truck beds, tail gates, running boards, fender flares and more
Compatibility
Compatible substrates: Aluminum, Fiberglass, Plastic, Wood.
Compatible paint systems: 1K.
Specifications
| Part No. | 4879 |
|---|---|
| Product Line | UPO |
| Standard/Approvals | California Pro65 Warning: Cancer |
| Application | For truck beds, tail gates, running boards, fender flares and more |
| Manufacturer | U-POL |
| Trade Mark | RAPTOR® |
| UPC | 5010796111885 |
| Brand | U-POL® |
| Color | Black |
| Coverage (sq-ft) | 8.6 |
| Curing Time | 3 to 4 hr at 70 deg F |
- VOC
- 545 g/L (4.5 lb/gal)
- Application Temp.
- 20 °C / 70 °F
- Coverage
- 8.6 sq-ft per can
- Compatible Substrates
- Aluminum, e-coat, fiberglass, OEM, plastic, primer, SMC, steel, wood
About U-POL
U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.
Frequently Asked Questions
What substrates can U-POL RAPTOR® 4879 be applied to?
The aerosol coating is compatible with aluminum, e-coat, fiberglass, OEM finishes, plastic, primer, SMC, steel and wood.
What is the coverage rate for this product?
A single 14.3 oz can provides approximately 8.6 sq-ft of finished coating.
At what temperature should I apply RAPTOR® 4879?
The recommended application temperature is 20 °C (70 °F).
What personal protective equipment is required when spraying this aerosol?
Use eye protection, chemical-resistant gloves, protective clothing and a respirator suitable for organic vapors.
Documents & Safety
Warning - This aerosol contains highly toxic chemicals that are harmful if inhaled, can cause severe skin and eye burns, is flammable, and is classified as a carcinogen and reproductive toxin. Wear safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls), and use a suitable respirator with appropriate filters. Ensure adequate ventilation and avoid breathing vapors or mist. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
Cure & dry schedule
Timing at 77°F
Flash
10 – 15 minutes between coats
Touch Dry
< 60 minutes
Overcoat
3 – 4 hours
Dry-Through
3 – 4 hours
How to apply
Steps
1Read the product's instructions before first use.
2Set it up and check fittings/connections.
3Use steady, even technique for consistent results.
4Clean after use to keep it performing.
5Store dry and protected between jobs.
Specifications
Full data
Frequently asked
Good to know
U-POL UPO is compatible with Aluminum, Fiberglass, Plastic, Wood. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for U-POL UPO is 3 to 4 hr at 70 deg F. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
Most in-stock orders for U-POL UPO ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of U-POL products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for U-POL UPO is 4879. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
