Fusor 140 Fast Sandable Bonding Adhesive, 1.7 oz Cartridge, Paste, Clear, 2K Co
LORD Fusor® 140/141 clear plastic bonding adhesive can be used for structural bonding of bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground…
Fusor® 140 Fast Sandable Bonding Adhesive is a two-component structural adhesive designed for rapid panel bonding and collision repair applications. This clear paste formula delivers reliable adhesion across multiple automotive substrates including steel, aluminum, ABS plastic, and primed surfaces, making it ideal for mixed-material repairs and panel replacement work.
The fast-cure formulation achieves handling strength in 30 minutes at 70°F, allowing technicians to sand and proceed with bodywork quickly to maintain efficient cycle times. The sandable finish integrates seamlessly into standard refinishing processes, eliminating the need for additional surface preparation steps. Each 1.7 oz cartridge provides consistent mixing ratios and precise application control for professional results.
Why Pros Choose LORD Fusor Adhesives Fast Sandable
- Clear urethane, non-yellowing structural adhesive
- Super fast cure
- High-strength, flexible bond
How to Use
For bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects
- Clean substrates thoroughly to remove dirt, grease, and contaminants before application
- Mix the 2K components according to manufacturer's ratio immediately before use
- Apply adhesive paste to prepared substrate surface using appropriate dispensing method
- Bond parts together and clamp or fixture as needed for proper contact
- Allow to cure for 30 minutes at 70°F before handling
- Sand cured adhesive as needed for surface preparation
Compatibility
Compatible substrates: Plastic.
Compatible paint systems: Urethane, Acrylic, 2K.
Specifications
| Part No. | 140 |
|---|---|
| Product Line | FUS |
| MFR Model | 140 |
| Standard/Approvals | OEM Approved | GHS Hazard |
| Application | For bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects |
| Manufacturer | LORD Fusor Adhesives |
| UPC | 80849810015 |
| Brand | Fusor® |
| Maximum Sale Quantity | 6 |
| Maximum Sale Day | 7 |
| Applicable Materials | Plastics, Primed and Painted Metals, Glass, Wood, Other Surfaces |
| Application Time | 1.5 min at 70 deg F |
| Component | 2K |
| Color | Clear |
| Setting Time | 5 min at 70 deg F |
| Flash Point | ?201 deg F |
| Container Size (oz) | 1.7 |
| Container Type | Cartridge |
| Form | Paste |
| Type | Fast Sandable |
| Curing Time | 30 min at 70 deg F |
- Product Type
- 2K Bonding Adhesive
- Form
- Paste
- Color
- Clear
- Package Size
- 1.7 oz Cartridge
- Cure Time
- 30 minutes at 70°F
- Compatible Substrates
- ABS, Aluminum, Plastic, Primer, Steel
- Sandable
- Yes
About LORD Fusor Adhesives
LORD Fusor Adhesives is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What surfaces can I use this on?
Fusor 140 bonds to ABS, aluminum, plastic, primer, and steel substrates. Clean and prepare surfaces according to manufacturer recommendations for optimal adhesion.
How long does it take to cure?
This adhesive cures in 30 minutes at 70°F. Cure time may vary with temperature - higher temperatures will accelerate cure, while lower temperatures will extend cure time.
Can I sand and paint over it?
Yes, Fusor 140 is sandable once fully cured. The clear finish allows for sanding and accepts paint systems for body shop refinishing applications.
What type of adhesive is this?
This is a 2-component (2K) structural bonding adhesive with a paste consistency. It provides fast cure times while maintaining sandability for body repair work.
Documents & Safety
- Safety Data Sheet (SDS)
- Technical Data Sheet (TDS)
- fusor_301_catalog.pdf
- fusor_140_manual.pdf
- Fusor_100EZ_Catalog.pdf
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.