Presta Products
Presta 134532 Super Cut Compound 32 oz Off-White Liquid Bottle
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Presta Marine Super Cut Compound is an ultra-aggressive compound designed to remove P800 and finer dual action or wet sand scratches and medium to light oxidation from gel coat, fiberglass and select painted.
Presta Super Cut Compound is a high-performance abrasive paste formulated for rapid removal of oxidation, fine scratches, and surface imperfections on a range of automotive finishes. Packaged in a 32 oz off-white bottle, it is intended for use by body shop technicians during the final stages of paint preparation before clear coat application.
The compound works effectively on ABS, aluminum, fiberglass, OEM plastics, and other polymer substrates, delivering consistent coverage with minimal material waste. Its formulation provides fast flash time, allowing quick progression through sanding cycles while maintaining a uniform removal rate across diverse surfaces.
Safety is critical: the product carries a "Warning" signal word and is classified for aquatic toxicity, carcinogenicity, eye damage, and skin corrosion. Use appropriate PPE-including eye protection, gloves, protective clothing, and a respirator-and ensure adequate ventilation during application.
Why Pros Choose Presta Products PES
- Contains no waxes, fillers or silicone
- Designed for use with a high-speed, rotary buffer
- Water-based formula cleans up easily
- VOC compliant and shop safe formula
How to Use
For use on gel coat and fiberglass surfaces
Compatibility
Compatible substrates: Fiberglass.
Specifications
| Part No. | 134532 |
|---|---|
| Product Line | PES |
| MFR Model | 134532 |
| Standard/Approvals | OSHA 29 CFR 1910.1200 | VOC Compliant |
| Application | For use on gel coat and fiberglass surfaces |
| Manufacturer | Presta Products |
| UPC | 075929445324 |
| Brand | Presta |
| Compound v Glaze | Compound |
| Container Size (oz) | 32 |
| Color | Off-White |
| Container Type | Bottle |
| Form | Liquid |
- Substrates
- ABS, Aluminum, Fiberglass, OEM, Plastic
About Presta Products
Presta Products is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates is Presta Super Cut Compound compatible with?
The compound can be applied to ABS, aluminum, fiberglass, OEM finishes, and other plastics.
What personal protective equipment is required when using this product?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator as recommended in the SDS.
Documents & Safety
- Safety Data Sheet (SDS)
- presta_134501_catalog.pdf
- presta_134501_specification_sheet.pdf
- Presta_134501_Specification_Sheet.pdf
Warning: This compound is hazardous. Use safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls or apron), and a suitable respirator. It can cause serious eye injury, skin burns, and is classified as a carcinogen. The product is toxic to aquatic organisms and should be kept from water sources. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Wash and dry the panel; mask delicate trim.
2Apply a small amount of product to the pad.
3Work in sections at moderate speed and pressure.
4Wipe the residue with a clean microfiber.
5Step to a finer polish to remove any haze.
Specifications
Full data
Frequently asked
Good to know
Presta Products PES is compatible with Fiberglass. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships Presta Products PES in a 32 (QT) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for Presta Products PES ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of Presta Products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for Presta Products PES is 134532. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
