US Chemical & Plastics
USC PRO-GLAZE 26118 Aqua Polyester Finishing Putty 24 Ounce Tube
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the booth.
PRO-GLAZE™ Maximum Performance Polyester Finishing Putty is effortless to spread and self-levels to a smooth, easy-to-sand surface that is pinhole free - improving your cycle time. The advanced easy-powder formula increases the sanding window. PRO-GLAZE™ provides excellent results for that invisible repair every time…
USC® PRO-GLAZE™ 26118 is a 24 oz liquid polyester finishing putty designed for high‑quality surface preparation and final finishing in automotive body repair. It provides a smooth, sandable base for clear coats, blends, and topcoats on a wide range of repair substrates.
Formulated for use at application temperatures between 210 °F and 230 °F, PRO‑GLAZE adheres to ABS, aluminum, fiberglass, galvanized steel, OEM plastics, polyester, primer, SMC, wood, and other typical body shop materials. The product contains 278 g/L VOCs, offering efficient coverage while maintaining the workability needed for precise sculpting and feathering.
Due to its flammable nature (flash point 93.9 °F) and listed GHS hazards, operators must wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator, and work in a well‑ventilated area. Follow standard first‑aid procedures for inhalation, ingestion, or skin contact as outlined in the SDS.
Why Pros Choose US Chemical & Plastics USC
- Easiest sanding putty, ultra smooth finish, pinhole free
- Maximum adhesion, stain free and tack free
How to Use
For minor body work and surface imperfections (1/8 in THK or less) such as sand scratches, chips, scratches and pinholes
- Clean and degrease the substrate; ensure all surface contaminants are removed.
- Maintain the work temperature between 210 °F and 230 °F during application.
- Apply the liquid polyester finishing putty directly from the tube using a brush, roller, or spreader, achieving the desired fill.
- Allow the putty to cure fully before sanding or proceeding to the next coating step, following the manufacturer’s recommended cure time.
Compatibility
Compatible substrates: Steel, Aluminum, Galvanized, Fiberglass, Body Filler.
Compatible paint systems: Polyester.
Specifications
| Part No. | 26118 |
|---|---|
| Product Line | USC |
| MFR Model | 26118 |
| Standard/Approvals | California Pro65 Warning: Cancer |
| Application | For minor body work and surface imperfections (1/8 in THK or less) such as sand scratches, chips, scratches and pinholes |
| Manufacturer | US Chemical & Plastics |
| Trade Mark | PRO-GLAZE™ |
| UPC | 037307261186 |
| Brand | USC® |
| Color | Aqua |
| Mixing Ratio | 50:1 |
| Form | Liquid |
| Container Type | Tube |
| Container Size (oz) | 24 |
- VOC
- 278 g/L (packaged)
- Application Temperature
- 210 °F – 230 °F
- Compatible Substrates
- ABS, aluminum, fiberglass, galvanized, OEM, plastic, polyester, primer, SMC, steel, wood
About US Chemical & Plastics
US Chemical & Plastics is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates can I apply USC® PRO-GLAZE™ 26118 to?
It is compatible with ABS, aluminum, fiberglass, galvanized steel, OEM plastics, polyester, primer, SMC, steel, and wood.
What personal protective equipment is required when using this putty?
Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator as recommended in the SDS.
Is the product flammable and what is its flash point?
Yes, it is flammable. The estimated flash point is 93.9 °F (34.4 °C).
What is the VOC content of the packaged product?
The packaged product contains 278 g/L of volatile organic compounds.
Documents & Safety
Warning: Use USC® PRO‑GLAZE™ 26118 with safety glasses, chemical‑resistant gloves, protective clothing and a suitable respirator. The product is toxic if inhaled or swallowed, can cause skin burns and serious eye damage, is flammable, and contains substances classified as carcinogenic and harmful to aquatic life. Handle only in well‑ventilated areas and avoid skin or eye contact. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Wash and dry the panel; mask delicate trim.
2Apply a small amount of product to the pad.
3Work in sections at moderate speed and pressure.
4Wipe the residue with a clean microfiber.
5Step to a finer polish to remove any haze.
Specifications
Full data
Frequently asked
Good to know
US Chemical & Plastics USC is compatible with Steel, Aluminum, Galvanized, Fiberglass, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships US Chemical & Plastics USC in a 24 container. Check the autofxmart catalog for other sizes and bulk pricing.
US Chemical & Plastics USC uses a mix ratio of 50:1. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.
Most in-stock orders for US Chemical & Plastics USC ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of US Chemical & Plastics products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.