US Chemical & Plastics
USC PRO-GLAZE 26120 Aqua Polyester Finishing Putty 30 Ounce Bottle
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the booth.
PRO-GLAZE™ Maximum Performance Polyester Finishing Putty is effortless to spread and self-levels to a smooth, easy-to-sand surface that is pinhole free - improving your cycle time. The advanced easy-powder formula increases the sanding window. PRO-GLAZE™ provides excellent results for that invisible repair every time…
USC® PRO‑GLAZE™ 26120 is a 30 oz liquid polyester finishing putty designed for high‑quality surface preparation and smoothing on a wide range of automotive substrates. It is formulated for use in body shop environments where precise fill and sandability are required before final coating.
The putty can be applied at 210 °F – 230 °F and is compatible with ABS, aluminum, fiberglass, galvanized metal, OEM plastics, polyester, primer, SMC, steel, and wood. Its VOC content is 278 g/L, providing a balance of performance and regulatory compliance. The low flash point of 93.9 °F (34.4 °C) requires careful handling.
Safety measures include wearing eye protection, chemical‑resistant gloves, protective clothing, and a respirator in well‑ventilated areas. The product is classified as a Warning hazard with acute toxicity, carcinogenicity, and skin corrosion risks, so proper ventilation and PPE are essential during use.
Why Pros Choose US Chemical & Plastics USC
- Easiest sanding putty, ultra smooth finish, pinhole free
- Maximum adhesion, stain free and tack free
How to Use
For minor body work and surface imperfections (1/8 in THK or less) such as sand scratches, chips, scratches and pinholes
Compatibility
Compatible substrates: Steel, Aluminum, Galvanized, Fiberglass, Body Filler.
Compatible paint systems: Polyester.
Specifications
| Part No. | 26120 |
|---|---|
| Product Line | USC |
| MFR Model | 26120 |
| Standard/Approvals | GHS and OSHA Hazards |
| Application | For minor body work and surface imperfections (1/8 in THK or less) such as sand scratches, chips, scratches and pinholes |
| Manufacturer | US Chemical & Plastics |
| Trade Mark | PRO-GLAZE™ |
| UPC | 037307261209 |
| Brand | USC® |
| Maximum Sale Quantity | 6 |
| Maximum Sale Day | 7 |
| Color | Aqua |
| Mixing Ratio | 50:1 |
| Form | Liquid |
| Container Type | Pumptainer Bottle |
| Container Size (oz) | 30 |
- VOC (g/L)
- 278
- Application Temp.
- 210 °F – 230 °F
- Compatible Substrates
- ABS, aluminum, fiberglass, galvanized, OEM, plastic, polyester, primer, SMC, steel, wood
About US Chemical & Plastics
US Chemical & Plastics is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates are compatible with USC® PRO-GLAZE™ 26120?
It can be applied to ABS, aluminum, fiberglass, galvanized metal, OEM plastics, polyester, primer surfaces, SMC, steel, and wood.
What temperature range is required for application?
The recommended application temperature is between 210 °F and 230 °F (99 °C–110 °C).
What personal protective equipment is required when using this product?
Use eye protection, chemical‑resistant gloves, protective clothing, and a respirator as specified in the SDS.
Documents & Safety
Warning: This polyester finishing putty is toxic if inhaled, swallowed, or absorbed through the skin, and can cause serious eye injury, skin corrosion, and respiratory irritation. It is flammable, a known carcinogen, and poses aspiration, organ‑toxicity, reproductive, and aquatic‑toxicity hazards. Use proper eye protection, chemical‑resistant gloves, protective clothing, and a suitable respirator when handling. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Wash and dry the panel; mask delicate trim.
2Apply a small amount of product to the pad.
3Work in sections at moderate speed and pressure.
4Wipe the residue with a clean microfiber.
5Step to a finer polish to remove any haze.
Specifications
Full data
Frequently asked
Good to know
US Chemical & Plastics USC is compatible with Steel, Aluminum, Galvanized, Fiberglass, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships US Chemical & Plastics USC in a 30 container. Check the autofxmart catalog for other sizes and bulk pricing.
US Chemical & Plastics USC uses a mix ratio of 50:1. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.
Most in-stock orders for US Chemical & Plastics USC ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of US Chemical & Plastics products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
