Overview
Built for the job.
Proven to save time and yield better results. It is the quickest and most effective way to seal door jambs, hood and trunk openings, gas filler doors, sunroofs, and other apertures. Eliminate unwanted hard paint edges caused by flat or rolled masking tape. Not only do you save time, you get a soft paint edge and a…
The X-L Products 2K HS Activator is a high-solids hardener designed for use with compatible two-component automotive coatings. This half-pint size provides precise mixing control for smaller repair jobs while maintaining the performance characteristics required for professional collision repair applications.
This activator demonstrates excellent adhesion across multiple substrates including steel, aluminum, bare metal, e-coat, polyester, primer, and SMC composites. The high-solids formulation contributes to efficient film build and durability in the cured coating system. When mixed according to manufacturer specifications, it enables proper cross-linking for optimal performance and longevity of the finished repair.
As with all two-component systems, proper ventilation and appropriate personal protective equipment are essential during mixing and application. Follow all manufacturer guidelines for mix ratios, pot life, and application parameters to ensure optimal results.
Why Pros Choose X-L Products X-L
- Easy-to-sand and gives perfect gloss holdout
- High Build Primer Filler for spot repairs (use at 4:1)
- A Non Sand (wet on wet) sealer (use at 4:1 + 2% reducer)
- Has excellent film build and surface leveling properties
- Is easy to sand and gives perfect gloss holdout
- Primer Surfacer for large areas (use at 4:1 + 1 reducer)
- Tintable with up to 1% urethane mixing base
- Offers excellent opacity and hiding power
- Can be air dried, low baked or I.R. Cured.
Application Guide
- Ensure substrate is properly prepared and clean. Compatible with aluminum, bare metal, e-coat, polyester, primer, SMC, and steel surfaces.
- Mix activator with base material according to manufacturer's specified ratio for the coating system being used.
- Stir mixture thoroughly to achieve uniform consistency and proper viscosity (4 seconds DIN cup measurement).
- Apply mixed material promptly after achieving proper viscosity to ensure optimal performance.
Compatibility
Compatible paint systems: Urethane, 2K.
Specifications
| Part No. | 36116 |
|---|---|
| Product Line | X-L |
| Manufacturer | X-L Products |
| UPC | 000050361168 |
| Rubberized | No |
- Compatible Substrates
- Aluminum, bare metal, e-coat, polyester, primer, SMC, steel
About X-L Products
X-L Products is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What surfaces can I use this activator on?
This 2K HS activator is compatible with aluminum, bare metal, e-coat, polyester, primer, SMC, and steel substrates.
What is the mix ratio for this activator?
The technical data specifies a viscosity of DIN 4/sec for proper mixing ratios with compatible 2K products.
Documents & Safety
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
Cure & dry schedule
Timing at 77°F
Pot life
1 - 2 hours
Flash off
15 min
Dry to sand
3 hours
Force-dry
20 - 30 min @ 60 C
Specifications
Full data
Frequently asked
Good to know
Most in-stock orders for X-L Products X-L ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of X-L Products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for X-L Products X-L is 36116. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
