A $1,479 Spray Gun, Cut in Half #Shorts
SATA lists the jet X RP 1.3 I DIGITAL pro at $1,479. Cut in half: the trigger's first pressure point lets air out before any paint (SATA calls it pre-air), pull further and the needle comes off the 1.3 mm tip, and at the head centre air breaks the paint up while horn air makes the fan flat. The whole cut-through is the full video on this channel.
The gun is a 3D illustration rendered in Unreal Engine from SATA's photos and parts list, and the narrator is an AI voice, labelled on screen. AutofxMart sells the SATA products shown; SATA is not involved.
In this video
- 0:00 A $1,479 spray gun, cut in half
- 0:06 Air first, then paint
- 0:18 Two airs make the fan
- 0:31 This exact gun
Shop what's in the video
Transcript
A $1,479 spray gun, cut in half SATA lists this spray gun at 1,479 dollars. Here's what's inside it.
Air first, then paint Pull the trigger to its first pressure point and only air comes out. SATA calls it pre-air. Pull further and the needle comes back off the 1.3 millimetre tip.
Two airs make the fan At the head, centre air breaks the paint into droplets, and horn air squeezes it into a flat fan. 325 litres of air a minute at 2.0 bar, says SATA's manual.
This exact gun This exact gun is in stock at autofxmart.com, and the whole cut-through is on our channel. What gun do you spray?
AutofxMart: paint mixed to the code and body shop supplies, shipped from South San Francisco. Video by Upshift.
