Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity

Country

Business accountsNow openApply
Why Car Scratches Disappear When Wet (and Come Back After a Wash)

Why Car Scratches Disappear When Wet (and Come Back After a Wash)

Why does a car scratch disappear when it's wet, and come back after a wash? Because it was never gone: filling the groove with water, wax or a glaze changes how the light reflects, and the scratch hides. Here's what a scratch really is, from inside the paint, and how to tell in ten seconds whether it will buff out: run a fingernail across it. If it glides, polish can level it. If it catches, it needs paint.

4:25 Β· Watch on YouTube Β· Subscribe to AutofxMart

Your paint is layers, about a tenth of a millimetre all together: on the steel, phosphate and e-coat against corrosion, about 25 microns of primer, 10 to 20 microns of colour with its metal flakes, and about 45 microns of clear on top (Ford's own paint research). The clear alone is thinner than a sticky note. Polishing doesn't fill a scratch: a compound cuts the clear around it down to the bottom of it, and you only have the clear the factory put on. Then read the bottom of the scratch: your car's colour means touch-up and clear; a flat grey or white is likely primer; shiny silver may be bare metal, which gets primer first.

Where it comes from
β€’ Ford Research and Advanced Engineering (Mark Nichols), Paint Materials and Processes from an Automotive OEM Perspective (2016): the layer thicknesses
β€’ Mike Phillips, Factory Clearcoats Are Thinner Than a Post-it Note; EngineerFix, How Thick Is OEM Paint Film on a Car?
β€’ Scratch depth and the fingernail test: Jackson's Wash, Dr. Beasley's, REREV; primer on bare metal: Scratches Happen, PaintScratch
β€’ Touch-up technique: ERA Paints, Dr. ColorChip, TouchUpDirect

In this video

  1. 0:00 Will it buff out? The answer
  2. 0:05 The fingernail test
  3. 0:21 Your paint, layer by layer
  4. 0:28 Five layers, about a tenth of a millimetre
  5. 0:58 What a scratch really is
  6. 1:13 Why a scratch disappears when wet
  7. 1:32 Toothpaste? A very mild polish
  8. 1:42 What buffing really does
  9. 2:04 The fingernail test, explained
  10. 2:30 Read the bottom of your scratch
  11. 2:37 Your colour at the bottom: touch-up
  12. 2:43 A flat grey or white: primer
  13. 2:50 Shiny silver: check for bare metal
  14. 3:02 Touch-up: your colour, mixed to your code
  15. 3:13 On the finder: a scratch is an answer
  16. 3:22 Fill it, clear it, level it
  17. 3:36 Five scratch-repair mistakes
  18. 3:52 Paint mixed to your code, and the polish
  19. 4:04 Glides: polish. Catches: paint.

Shop what's in the video

Good to know

  • The fingernail test is a first check, not a measurement. A slight catch can still be a deep clear-coat scratch: polishing can make it much less noticeable, not perfect.
  • Every product's own directions and safety data sheet come first
  • The microscopic shots are 3D illustrations, drawn to Ford's layer figures and labelled on screen; nothing in them is a real repair. The counter footage is our own, and AutofxMart sells the products shown.
Transcript

Will it buff out? The answer Watch this scratch. Gone. Except it isn't fixed. It's just full.

The fingernail test Will it buff out? Run a fingernail across it. If it glides, polish can level it. If it catches, it needs paint. Here's why, from inside the paint. Everything in this video is at autofxmart.com, linked below.

Your paint, layer by layer This is the paint on a car, cut open. The layers are drawn to Ford's own paint research.

Five layers, about a tenth of a millimetre On the steel, a thin phosphate coat, then the e-coat: those two fight corrosion. Then about twenty-five microns of primer, to smooth it and make the paint stick. Then your colour: ten to twenty microns of basecoat, with the metal flakes in it. And on top, about forty-five microns of clear. That's the shine, and the colour's shield from UV. All of it, about a tenth of a millimetre. The clear alone is thinner than a sticky

What a scratch really is note. A scratch is a groove. Something hard drags across the clear and ploughs a trench in it. Its walls are broken, not smooth, and they catch the light differently from the paint around them. That's the line you see.

Why a scratch disappears when wet Now fill that groove with something slick: water, oil, wax, a glaze. The light stops catching the walls, and the scratch hides. That's why a scratch can seem to vanish under a wet cloth or a fresh coat of wax. But nothing was removed. Fillers wear and wash off, and the scratch is back.

Toothpaste? A very mild polish Toothpaste does one more thing: it has abrasives in it. It's a very mild polish. And polishing is the real fix, for the right scratch.

What buffing really does Here's what polishing actually does. It doesn't fill the scratch. A compound is fine abrasive, and it cuts the clear around the scratch, lower and lower, until the surface is level with the bottom of it. The scratch is gone because the paint around it is gone. And every pass takes clear you don't get back: you only have what the factory put on.

The fingernail test, explained Now a deeper one. This scratch went through the clear, into the colour. Level it, and you'd cut away all the clear around it, and the groove would still be there, in bare colour, with nothing left to protect it. That's what your fingernail is measuring. If it glides, the scratch is likely in the clear, and polish can level it. If it catches, it has likely gone deeper. Polish can soften it. It won't remove it.

Read the bottom of your scratch Then look at the bottom of it, in good light. If your nail glides, it's likely in the clear: polish.

Your colour at the bottom: touch-up If you can see your car's colour in the groove, it's in the paint: touch-up, then clear.

A flat grey or white: primer A different, flat shade, often grey or white, is likely primer, though primer shades vary.

Shiny silver: check for bare metal And shiny silver may be bare metal. Shine alone doesn't prove it, so check with a flashlight. Bare metal gets primer first, or paint can peel and rust can grow under

Touch-up: your colour, mixed to your code it. For a scratch into the colour, the fix is paint in your car's colour. At our counter in South San Francisco, that's paint mixed to your car's code, gram by gram.

On the finder: a scratch is an answer On the paint finder, type your paint code, or look your car up. Then 'How much do I need?': a scratch is one of the answers.

Fill it, clear it, level it Build the colour up inside the groove in thin coats, each one left to dry, until it's full. Clear goes on top: the colour needs it for gloss and UV. Once it has cured, polish it level with the paint around it.

Five scratch-repair mistakes Five ways a scratch repair goes wrong. One: buffing a scratch your nail catches. Two: trusting a filler. Three: one thick blob instead of thin coats. Four: skipping the clear. Five: painting straight onto bare metal.

Paint mixed to your code, and the polish Your colour, mixed to your car's code, is in the paint finder at autofxmart.com. The compound and the polish are there too, and a primer made for bare metal.

Glides: polish. Catches: paint. Glide or catch? And what colour is at the bottom of yours? Tell us in the comments. If it caught, the colour at the bottom is your fix: touch-up, primer first if it's metal. Next on this channel: cut and buff, step by step. Subscribe so you don't miss it.

AutofxMart: paint mixed to the code and body shop supplies, shipped from South San Francisco. Video by Upshift.

Previous article Why do scratches disappear when wet? #shorts
Next article How Much Clear Coat for a Bumper vs a Whole Car