Evercoat
Evercoat Rage Lightweight Premium Body Filler, Gray, 750 ml Can
No reviews yet
Hazardous material · Liquid
Liquid hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
A premium lightweight body filler formulated with the finest resin available. Tack free and stain resistant, which extends the life of sandpaper and reduces the chance of staining. Superior spreading and sanding properties eliminate the need for cheese grating or sanding with coarse papers. Advanced formula with…
Evercoat Rage 100105 Lightweight Premium Body Filler is a low-viscosity, gray liquid filler designed for rapid repair of automotive panels. It is formulated for seamless blending on aluminum, galvanized steel, and standard steel substrates, making it suitable for structural repairs and surface preparation before painting.
The product features an "on-the-fly" mix ratio that can be adjusted to ambient conditions, allowing technicians to maintain optimal workability without precise measuring. Its lightweight composition provides high coverage with minimal material waste, and the filler cures quickly enough to keep repair cycles short while delivering a sandable finish compatible with standard topcoats.
Handling requires full PPE: eye protection, chemical-resistant gloves, protective clothing, and a respirator in well-ventilated areas. The formulation has a flash point of 38 °C (100 °F) and is classified under multiple GHS hazards, including acute toxicity, carcinogenicity, and flammability. Follow the SDS first-aid guidelines for inhalation, skin, eye, and ingestion incidents.
Why Pros Choose Evercoat Lightweight Premium
- The first body filler that was tack free and stain free
- Eliminates the need for cheese grating or sanding with coarse papers
- Contains ZNX-7® for superior adhesion and featheredging on all metal substrates
How to Use
For steel, aluminum, fiberglass, galvanized steel, SMC substrates
Compatibility
Compatible substrates: Steel, Aluminum, Galvanized, SMC, Body Filler.
Specifications
| Part No. | 105 |
|---|---|
| Product Line | FIB |
| MFR Model | 100105 |
| Standard/Approvals | OSHA and GHS Hazard| California Pro65 Warning: Cancer |
| Includes | Blue Cream Hardener |
| Application | For steel, aluminum, fiberglass, galvanized steel, SMC substrates |
| Manufacturer | Evercoat |
| Trade Mark | Rage® |
| UPC | 023289001056 |
| Brand | EVERCOAT® |
| Color | Gray |
| Mixing Ratio | 2% Hardener |
| Type | Lightweight Premium |
| Form | Liquid |
| Container Type | Can |
| Container Size (mL) | 750 |
- Mix Ratio
- On-the-fly, adjusted for weather conditions
- Compatible Substrates
- Aluminum, galvanized steel, steel
About Evercoat
Evercoat is the #1 body filler brand in North America, supplying professional collision shops with premium fillers, glazes, and fiberglass repair products.
Frequently Asked Questions
What substrates is EVERCOAT® Rage® 100105 compatible with?
The filler can be applied to aluminum, galvanized steel, and regular steel surfaces.
What personal protective equipment (PPE) is required when handling this product?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator as recommended by the SDS.
Is EVERCOAT® Rage® 100105 flammable, and what is its flash point?
The product is classified as flammable with a flash point of 38 °C (100 °F).
What first-aid steps should be taken if the product contacts skin or eyes?
For skin contact, wash thoroughly with soap and water. For eye exposure, flush with plenty of water for at least 20 minutes.
Documents & Safety
Signal Word: Danger
PPE Required: safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls), and a respirator suitable for organic vapors.
Key Hazards: This filler is highly flammable, can cause severe eye injury, skin burns, and respiratory irritation. It contains substances that are toxic if inhaled or swallowed and may present long-term health risks such as carcinogenicity and reproductive effects.
Always refer to the full SDS before use.
PPE Required: safety glasses or goggles, chemical-resistant gloves, protective clothing (coveralls), and a respirator suitable for organic vapors.
Key Hazards: This filler is highly flammable, can cause severe eye injury, skin burns, and respiratory irritation. It contains substances that are toxic if inhaled or swallowed and may present long-term health risks such as carcinogenicity and reproductive effects.
Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Sand to bare metal and clean the repair.
2Mix filler and hardener to one uniform color.
3Spread thin layers within the work time.
4Let set, then block-sand through the grits.
5Prime before applying topcoat.
Specifications
Full data
Frequently asked
Good to know
Evercoat FIB is compatible with Steel, Aluminum, Galvanized, SMC, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships Evercoat FIB in a 750 (QT) container. Check the autofxmart catalog for other sizes and bulk pricing.
Evercoat FIB uses a mix ratio of 2% Hardener. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.
Most in-stock orders for Evercoat FIB ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of Evercoat products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
