DTM primer or sealer? It's the same can #shorts
Primer or sealer? Valspar's DTM2004 is both, and its label says so: DTM Surfacer/Sealer. Valspar's own data sheet: 4:1:1 by volume is the primer surfacer; 4:1:2, one more part of reducer, is the sealer. Let the sealer flash dull 5β10 minutes between coats, and topcoat in 20β30 minutes with no sanding for up to 8 hours.
Full video, every number from Valspar's data sheet: the link above.
The spraying and stirring shots are AI-generated video (LTX-2.5), labelled on screen, not a real repair. The cans are real products from our store, and AutofxMart sells them. It's a 2K primer: read its SDS, and wear a respirator.
In this video
- 0:00 Primer or sealer?
- 0:02 The label says both
- 0:08 One more part of reducer
- 0:15 Flash dull
- 0:19 Colour, no sanding
- 0:25 The full sheet
- 0:31 Primer, or sealer?
Shop what's in the video
Transcript
Primer or sealer? Primer, or sealer?
The label says both Same can. The label says both: surfacer, slash, sealer.
One more part of reducer Four to one to one: surfacer. One more part of reducer, four to one to two: sealer.
Flash dull Let the sealer flash dull, five to ten minutes.
Colour, no sanding Colour in twenty to thirty minutes. No sanding, up to eight hours.
The full sheet Full sheet linked below. Next up: when to sand and buff. Follow so you don't miss
Primer, or sealer? it. Primer, or sealer?
AutofxMart: paint mixed to the code and body shop supplies, shipped from South San Francisco. Video by Upshift.
