Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity
Cleaning a spray gun? 4 rules from the gun makers' manuals #Shorts

Cleaning a spray gun? 4 rules from the gun makers' manuals #Shorts

Four rules for cleaning a spray gun, from the gun makers' own manuals (DeVilbiss and 3M):
1. Take the cap, tip and needle off, and never put the gun body in solvent: DeVilbiss says it's hard on the packings and the lube.
2. Air cap holes get a brush or a toothpick, never a wire: 3M says a scratch can distort the spray pattern.
3. Flush the paint passage with gun cleaner (3M 26689 in the video).
4. After every cleaning, a drop of gun lube on the trigger stud, the air valve stem and the needle where it enters the packing.

0:56 Β· Watch on YouTube Β· Subscribe to AutofxMart

Real footage from our paint counter. AutofxMart sells the products shown.

In this video

  1. 0:00 Cleaning a spray gun
  2. 0:05 1. Never soak the gun body
  3. 0:18 2. No wire in the cap holes
  4. 0:27 3. Flush the paint passage
  5. 0:34 4. Lube after every cleaning
  6. 0:45 Cleaner, lube, kit

Shop what's in the video

Transcript

Cleaning a spray gun Cleaning a spray gun? Four rules, from the gun makers' own manuals.

1. Never soak the gun body One: the cap, the tip and the needle come off, and the gun body never goes in the solvent. DeVilbiss says that's hard on the packings and the lube; 3M says don't immerse it.

2. No wire in the cap holes Two: the air cap holes get a brush or a toothpick, never a wire. 3M says a scratch in those holes can distort the spray

3. Flush the paint passage pattern. Three: flush the paint passage with gun cleaner. That's 3M's 26689 here.

4. Lube after every cleaning Four: after every cleaning, a drop of gun lube on the moving parts: the trigger stud, the air valve stem, and the needle where it goes into the packing.

Cleaner, lube, kit The cleaner, DeVilbiss's gun lube and a kit with brushes and wooden picks are at autofxmart.com. Comment the gun you spray with.

AutofxMart: paint mixed to the code and body shop supplies, shipped from South San Francisco. Video by Upshift.

Next article Mat or cloth over a rust hole? Fiberglass, by the makers' sheets #Shorts