SprayMax
SprayMax Epoxy Primer Beige — 14.1
No reviews yet
WARNING: Cancer & Reproductive Harm
California PROP65 WARNING: This product contains the following chemical(s) known to the State of California to cause birth defects or other reproductive harm. This product contains the following chemical(s) known to the State of California to cause c....
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Excellent adhesion and corrosion protection properties, even critical surfaces such as aluminum Very smooth flow Outstanding insulating and sealing properties Recoatable with all standard solvent/water borne basecoats or single stage top coats For cleaned and sanded surfaces Universal 2K epoxy primer filler for all…
SprayMax 2K Epoxy Primer Beige is a two-component, spray-applied primer designed for professional body shop applications where adhesion and corrosion resistance are critical. It provides a uniform beige base coat suitable for a wide range of topcoats on repair panels.
The formulation offers a rapid flash time of 2-3 minutes, allowing fast recoat cycles while maintaining strong bond strength to aluminum, e-coat, galvanized steel, plastic, polyester, existing primer, and bare steel substrates. This versatility reduces the need for multiple specialty primers in mixed-material repairs.
Handling requires standard PPE: eye protection, chemical-resistant gloves, protective clothing, and a respirator with appropriate filtration. Use in a well-ventilated area and follow the SDS warnings (acute toxicity, aspiration hazard, carcinogen, etc.) to ensure safe application.
Why Pros Choose SprayMax SPM
- Universal 2K epoxy primer filler for all problematic surfaces, for example, metal, non-ferrous metal, galvanized sheet steel or anodized aluminum.
Application Guide
- Clean and degrease the substrate; remove all rust, oil, wax, and loose material to ensure proper adhesion.
- Apply the 2K epoxy primer by spraying evenly over the prepared surface. Allow a flash time of 2-3 minutes before applying any additional coat or topcoat.
- After flashing, proceed with the next coating system as specified for the repair job.
Compatibility
Compatible substrates: Steel, Aluminum, Galvanized, Epoxy Primer.
Compatible paint systems: Epoxy, Solvent, 2K, Basecoat.
Specifications
| Part No. | 3680032 |
|---|---|
| Product Line | SPM |
| MFR Model | 3680032 |
| Standard/Approvals | California PROP65 WARNING: This product contains the following chemical(s) known to the State of California to cause birth defects or other reproductive harm. This product contains the following chemical(s) known to the State of California to cause c.... |
| Manufacturer | SprayMax, Peter Kwasny, Inc |
| UPC | 879910000161 |
| Brand | SprayMax® |
| Solids Content | XXDeleteXX |
| Color | Beige |
| Container Size (oz) | 14.1 |
| Curing Time | 12 hr Dry |
| Coverage (sq-ft) | 8.1 to 1.2 |
| Use With | Metal, Non-Ferrous Metal, Galvanized Sheet Steel, Anodized Aluminum |
- Flash Time
- 2-3 min
- Compatible Substrates
- Aluminum, e-coat, galvanized, plastic, polyester, primer, steel
About SprayMax
SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.
Frequently Asked Questions
What substrates can I apply the 2K Epoxy Primer Beige to?
The primer is compatible with aluminum, e-coat, galvanized steel, plastic, polyester, existing primers, and plain steel.
How long does it stay tacky before I can handle the part?
The flash time is 2 - 3 minutes under normal conditions. After this period the surface will be dry to touch.
What personal protective equipment is required when spraying this product?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors and aerosols.
Are there any major health hazards I should be aware of?
The product is classified with the signal word "Warning" and carries GHS hazards including acute toxicity, aspiration hazard, carcinogenicity, flammability, oxidizing potential, eye damage, skin corrosion, and reproductive toxicity. Follow all PPE recommendations and handle in a well-ventilated area.
Documents & Safety
- Safety Data Sheet (SDS)
- spraymax_3680080_catalog.pdf
- spraymax_3680032_specification_sheet.pdf
- SDSREZ57_3680032_20190731_EN.pdf
Warning - Use this 2K epoxy primer only with proper protection. Wear safety glasses or a face shield, chemical-resistant gloves, coveralls or other protective clothing, and a suitable respirator when spraying. The material is toxic if inhaled, can cause severe eye injury, skin corrosion, and is classified as carcinogenic and a reproductive hazard; it is also flammable, an oxidizer, and stored under compressed gas pressure. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
SprayMax, Peter Kwasny, Inc SPM is compatible with Steel, Aluminum, Galvanized, Epoxy Primer. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for SprayMax, Peter Kwasny, Inc SPM is 12 hr Dry. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships SprayMax, Peter Kwasny, Inc SPM in a 14.1 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SprayMax, Peter Kwasny, Inc SPM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SprayMax, Peter Kwasny, Inc products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
