SprayMax
SprayMax 1K Empty Fillclean Version 1 — 7.5, Clear
No reviews yet
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
For the filling of the specific color tone of solvent 1K base paints in the brands and qualities offered by the paint manufacturers (as follows). The result is a ready-to-use SPRAYMAX® 1K aerosol can filled with 1K solvent base basecoat. The best product and quality results are guaranteed.
Spraymax 1K Empty Fillclean Version 1 is a single‑component, fast‑drying filler formulated for seamless repair of automotive body panels. It is designed for use in spray booths and hand‑trowel applications where a quick return to sanding and painting is required.
The product offers a flash time of 2–3 minutes, allowing rapid re‑coat cycles and efficient shop throughput. It adheres to a wide range of substrates, including aluminum, e‑coat, galvanized steel, plastic, polyester primer, and standard steel, providing versatile coverage for most repair scenarios. The low flash point of 0 °C (without propellant) underscores the need for proper handling and storage.
Due to its classification as acute toxic, aspiratable, carcinogenic, and flammable, the filler must be applied with full personal protective equipment: eye protection, chemical‑resistant gloves, protective clothing, and a respirator. Adequate ventilation is required to control vapors, and all standard first‑aid measures should be followed in case of exposure.
Why Pros Choose SprayMax SPM
- For the filling of the specific color tone of solvent 1K base paints in the brands and qualities offered by the paint manufacturers (as follows). The result is a ready-to-use SPRAYMAX® 1K aerosol can filled with 1K solvent base basecoat. The best product and quality results are guaranteed.
How to Use
For 1K solvent based basecoats and primed surfaces
- Clean and degrease the substrate; ensure the surface is free of oil, wax, and contaminants before coating.
- Apply Spraymax 1K Empty Fillclean Version 1 directly from the spray gun; no mixing required.
- Allow the first coat to flash for 2‑3 minutes before applying additional coats, if needed.
- After the final coat has flashed, allow the part to cure according to the manufacturer's recommended cure schedule before handling.
Compatibility
Compatible paint systems: Solvent, 1K, Basecoat.
Specifications
| Part No. | 3682071 |
|---|---|
| Product Line | SPM |
| MFR Model | 3682071 |
| Standard/Approvals | GHS02 | GHS04 | GHS07 |
| Application | For 1K solvent based basecoats and primed surfaces |
| Manufacturer | SprayMax, Peter Kwasny, Inc |
| UPC | 879910000222 |
| Brand | SprayMax® |
| Maximum Sale Quantity | 120 |
| Maximum Sale Day | 7 |
| Component | 1K |
| Color | Clear |
| Container Size (oz) | 7.5 |
- Flash Time
- 2 – 3 min
- Compatible Substrates
- Aluminum, e‑coat, galvanized, plastic, polyester, primer, steel
About SprayMax
SprayMax 2K aerosols deliver urethane clear, primer, and basecoat performance from a can — ideal for spot repairs and small panels.
Frequently Asked Questions
What substrates can I apply Spraymax 1K Empty Fillclean Version 1 to?
It is compatible with aluminum, e‑coat, galvanized metal, plastic, polyester, primer‑coated surfaces, and steel.
What personal protective equipment is required when using this product?
Wear eye protection, chemical‑resistant gloves, protective clothing, and a respirator approved for organic vapors.
How long is the flash time before the coating becomes tack‑free?
The flash time is 2 – 3 minutes under typical shop conditions.
Documents & Safety
- Safety Data Sheet (SDS)
- spraymax_3680080_catalog.pdf
- spraymax_3682071_specification_sheet.pdf
- SDSREZ199_3682071_20190731_EN.pdf
Danger. Wear safety glasses, chemical‑resistant gloves, protective clothing, and a suitable respirator when handling this product. The material is highly flammable, toxic if inhaled or swallowed, can cause severe eye damage, skin burns, and is classified as a carcinogen and reproductive toxin. It also presents aspiration hazards and may irritate the respiratory system. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
This listing ships SprayMax, Peter Kwasny, Inc SPM in a 7.5 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SprayMax, Peter Kwasny, Inc SPM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SprayMax, Peter Kwasny, Inc products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SprayMax, Peter Kwasny, Inc SPM is 3682071. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
Order in multiples of
6
