Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity

Country

Business accountsNow openApply
High Teck

High Teck 3909 HB Primer Gray Aerosol

$18.48
Out of stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

High Teck HB Primer is ideal for quick repairs on a variety of materials including fully cured paint, polyester body fillers, GRP, steel, aluminum, and galvanized panels. Make sure your surface is properly repaired before applying the product.

HIGH TECK HB PRIMER GRAY AEROSOL is a high-build primer designed for professional automotive refinishing applications. This aerosol primer provides excellent adhesion and build properties for both spot repairs and full panel preparation, delivering consistent coverage across multiple substrate types including steel, aluminum, galvanized metal, fiberglass, SMC, and existing OEM finishes.

The primer applies optimally at 68Β°F and requires 1-2 coats depending on the substrate condition and desired build. Its versatile formulation bonds effectively to bare metal, e-coat, and previously primed surfaces, making it suitable for a wide range of collision repair scenarios. The aerosol format eliminates mixing requirements and provides convenient application for smaller repair areas and touch-up work.

Store in proper conditions to maintain the 2-year shelf life. Always use appropriate respiratory protection and ensure adequate ventilation during application and curing.

Why pros choose it

  • Can be used direct-to-metal and on plastic
  • Provides spray-gun like finish
  • High atomization fan pattern tip to increase coverage
  • Easy to sand
  • Chromate free

Application Guide

  1. Ensure substrate is clean and properly prepared. Product is compatible with aluminum, bare metal, e-coat, fiberglass, galvanized metal, OEM finishes, existing primer, SMC, and steel surfaces.
  2. Bring product and substrate to application temperature of 68Β°F before use.
  3. Shake aerosol can thoroughly before application.
  4. Apply 1-2 thin, even coats using proper spray technique and overlap pattern.

Compatibility

Compatible substrates: Steel, Aluminum, Galvanized, Plastic, Body Filler.

Compatible paint systems: Polyester.

Specifications

Technical specifications for HIGH TECK HB PRIMER GRAY AEROSOL
Part No. 3909
Product Line HIT
Manufacturer High Teck Products
UPC 813834018987
Application Temperature
68Β°F
Number of Coats
1-2
Compatible Substrates
Aluminum, bare metal, e-coat, fiberglass, galvanized, OEM, primer, SMC, steel
Shelf Life
2 years (proper storage conditions)

About High Teck

High Teck is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can I use this primer on?

This primer is compatible with aluminum, bare metal, e-coat, fiberglass, galvanized metal, OEM finishes, existing primer, SMC (sheet molding compound), and steel substrates.

How many coats should I apply?

Apply 1 to 2 coats depending on your specific application requirements and desired build.

What temperature should I apply this at?

Apply at 68Β°F for optimal performance and proper curing characteristics.

How long will this product last in storage?

The aerosol has a 2-year shelf life when stored under proper storage conditions.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Cure & dry schedule

Timing at 77Β°F

Flash
5 - 10 mins
Sandable/Recoat
60 minutes
How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandHigh Teck Products
Part number3909
UPC813834018987
ApplicationHigh Teck HB Primer is ideal for quick repairs on a variety of materia
SizeCN
OriginUS
ConditionNew
SKUHIT.3909.CN
Frequently asked

Good to know

this High Teck product is compatible with Steel, Aluminum, Galvanized, Plastic, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The MPN for this High Teck product is 3909. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet β€” be the first to review this product.