Seymour Paints
Seymour Spruce 98-8 Enamel Spray Paint - Hunter Green, 16 oz Aerosol, 15 sq-ft Coverage
No reviews yet
Hazardous material · Aerosol
Aerosol hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer and Reproductive Harm
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
A top quality spray paint that is economically priced. Spruce® provides a tough finish that is durable and inhibits rust. Available in a complete line of high gloss colors, with some available in semi-gloss and flat finishes. Hides well, dries fast, and resists chipping and peeling. For maximum protection, rusted…
SEYMOUR® Spruce® 98-8 Enamel Spray Paint in Hunter Green is a high-performance aerosol coating designed for automotive body repair and refinishing. Delivered in a 16 fl-oz can, it provides up to 15 sq ft of uniform coverage per can, making it suitable for panel touch-ups, full-panel finishes, or small-area color matching.
The enamel formulates for rapid recoat capability with a recommended recoat time of 30 minutes when applied within the specified temperature range of 50-90 °F. It adheres to e-coat, primer, and wood substrates without additional bonding agents, offering consistent gloss and color depth. Shelf life is guaranteed for two years under proper storage conditions.
Due to its flammable nature (flash point -19 °C) and classified hazards-including aquatic toxicity, carcinogenicity, and skin corrosion-use requires eye protection, chemical-resistant gloves, protective clothing, and a respirator in a well-ventilated area. Follow all H-statements listed on the SDS for safe handling.
Why Pros Choose Seymour Paints SEY
- Designed for close-up (8 to 10 in) spraying
- Eliminates wasted paint, over-spraying and sag
- Does not contain lead, CFC's, chromates or chlorinated solvents
Application Guide
- Clean the substrate (e-coat, primer, or wood) to remove dust, oil, and loose material; ensure a dry surface.
- Shake the aerosol can for at least 30 seconds after the mixing ball rattles to disperse pigment uniformly.
- Apply the first coat using even, overlapping strokes, maintaining a spray distance of 6-10 in. and working within an ambient temperature of 50-90 °F.
- Allow the first coat to flash for 30 minutes (recoat time) before applying additional coats as needed to achieve full opacity.
- After the final coat, let the finish cure under the same temperature range; no further cleanup is required beyond proper disposal of the empty can.
Compatibility
Compatible paint systems: Enamel, Solvent.
Specifications
| Part No. | 98-8 |
|---|---|
| Product Line | SEY |
| MFR Model | 98-8 |
| Standard/Approvals | California Pro65 Warning: Cancer and Reproductive Harm |
| Manufacturer | Seymour Paints |
| Trade Mark | Spruce® |
| UPC | 043281002417 |
| Brand | SEYMOUR® |
| Solids Content | 23% |
| Color | Hunter Green |
| Container Size (oz) | 16 |
| Finish | Gloss |
| Curing Time | 5 min Touch, 30 min Recoat |
| Coverage (sq-ft) | 15 |
- Recoat Time
- 30 min
- Coverage
- up to 15 ft²
- Application Temp.
- 50-90 °F
- Shelf Life
- 2 years (guaranteed)
- Compatible Substrates
- E-coat, primer, wood
About Seymour Paints
Seymour Paints is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates can SEYMOUR® Spruce® 98-8 Enamel be applied to?
It is compatible with e-coat, primer and wood surfaces.
How long must I wait before recoating?
The recommended recoat time is 30 minutes under the specified application temperature range.
What personal protective equipment is required when spraying this product?
Use eye protection, chemical-resistant gloves, protective clothing and a respirator suitable for organic vapors.
Can I sand or apply additional coats over the dried enamel?
Yes. Once the initial coat has cured (minimum 30 minutes), the surface can be sanded and further coats applied.
What coverage can I expect from a 16-oz aerosol can?
One can provides up to 15 sq ft of coverage when sprayed at 50-90 °F.
Documents & Safety
Danger - This aerosol paint is highly flammable and releases vapors that are toxic if inhaled, can burn skin, cause serious eye injury, and pose long-term health risks such as cancer and reproductive effects. It is also hazardous to aquatic life. Wear safety glasses or a face shield, chemical-resistant gloves, protective clothing (coveralls), and use a suitable respirator with appropriate filters. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
The curing time for Seymour Paints SEY is 5 min Touch, 30 min Recoat. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships Seymour Paints SEY in a 16 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for Seymour Paints SEY ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of Seymour Paints products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for Seymour Paints SEY is 98-8. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
