Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
U-POL

U-POL 0645 — High Performance Finishing Glaze, 29.7oz Pouch

$63.25
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

A high-performance finishing glaze, that has a super fast-curing profile and is specifically formulated to correct minor imperfections such as pinholes, scratches and stone chips. Its self-leveling formulation providing a flawlessly smooth finish which requires minimal sanding. The bag design allows for simple dispensing of the entire product, reducing wastage. U-POL is a registered trademarks of U-POL Ltd, an Axalta Coating Systems company© 2025. Approved as part of the Axalta standard repair process.

TECTIUM High Performance Finishing Glaze is a professional-grade body filler designed for final surface preparation and minor imperfection correction on automotive substrates. This 29.7oz pouch format provides convenient dispensing for spot repairs and finishing work where smooth, paintable surfaces are critical.

The glaze offers exceptional versatility, bonding effectively to aluminum, galvanized steel, SMC, primed surfaces, and bare steel substrates. With a low actual VOC content of 31g/l despite a regulatory VOC rating of 192g/l (1.6lb/gal), it meets environmental compliance requirements while delivering reliable performance. The 2-year shelf life ensures consistent workability when stored properly.

Apply in thin, even coats for optimal results and sand to desired smoothness once fully cured. Use appropriate respiratory protection and ensure adequate ventilation during application and sanding operations.

Why pros choose it

  • Exceptionally smooth and ultra fine formula
  • Advanced, lightweight technology
  • Self-levelling
  • Excellent flow properties
  • Exceptional adhesion to multiple substrates
  • 3 X Faster Curing profile — snap cure technology
  • Minimal sanding
  • Pinhole resistant
  • Resistant to Solvents
  • The bag allows for simple dispensing of the entire product

Application Guide

  1. Ensure substrate is clean and properly prepared. Compatible with aluminum, galvanized steel, primer, SMC, and steel surfaces.
  2. Apply finishing glaze directly from pouch using appropriate application tool.
  3. Work material into surface imperfections and feather edges as needed.
  4. Allow proper cure time before sanding and topcoating.

Compatibility

Compatible paint systems: Solvent.

Specifications

Technical specifications for TECTIUM™ High Performance Finishing Glaze, 29.7oz Pouch
Part No. 0645
Product Line UPO
Manufacturer U-POL
UPC 0501079611439
VOC Content
192 g/L (1.6 lb/gal), actual VOC 31 g/L
Compatible Substrates
Aluminum, galvanized steel, primer, SMC, steel
Shelf Life
2 years
Container Size
29.7 oz pouch

About U-POL

U-POL delivers pro-grade refinish products including Raptor bed liner, Dolphin glazes, and Power Can aerosols used in shops worldwide.

Frequently Asked Questions

What surfaces can I use this finishing glaze on?

TECTIUM High Performance Finishing Glaze is compatible with aluminum, galvanized steel, primer, SMC (sheet molding compound), and steel substrates.

What is the VOC content of this product?

The regulatory VOC is 192g/l (1.6lb/gal), with an actual VOC of 31g/l.

How long can I store this product?

The shelf life is 2 years when stored according to manufacturer specifications.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Cure & dry schedule

Timing at 77°F

Work Time
4 min - 6 min
Sand & Prime
8 min - 10 min
IR Bake
176ºF 5 minutes
How to apply

Steps

1Wash and dry the panel; mask delicate trim.
2Apply a small amount of product to the pad.
3Work in sections at moderate speed and pressure.
4Wipe the residue with a clean microfiber.
5Step to a finer polish to remove any haze.
Specifications

Full data

BrandU-POL
Part number0645
UPC0501079611439
ApplicationA high-performance finishing glaze, that has a super fast-curing profi
OriginUS
ConditionNew
SKUUPO.0645.EA
Frequently asked

Good to know

The MPN for this U-POL product is 0645. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.