Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
LORD Fusor Adhesives

Fusor 80849810011 — 124 Super Fast Flexible Foam 1.7 oz Black Cartridge

$45.77
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Fusor® 121/124 flexible foam is a two-component, urethane-based foam used for sound deadening and sealing/filling of voids in the vehicle where air and wind noise would enter the cabin of the vehicle, along with the gas tank filler area.

Fusor® 124 is a two-part super fast flexible foam designed for rapid structural repairs and fill applications in automotive bodywork. The low-viscosity mixture expands to seal gaps, bond panels, and provide a durable, resilient substrate ready for downstream finishing.

At 70 °F (21 °C) the formulation offers a work time of only 10 seconds and reaches full cure in 1 hour, minimizing shop turnaround. It adheres effectively to ABS, aluminum, OEM-coated surfaces, primer, and steel, delivering consistent coverage without sagging. The fast flash time supports high-volume production while maintaining flexibility after cure.

Because the product is classified as "Danger" with acute toxicity, carcinogenicity, and skin corrosivity hazards, technicians must wear eye protection, chemical-resistant gloves, protective clothing, and a respirator in well-ventilated areas. Follow standard first-aid procedures for inhalation, skin, eye, or ingestion exposure.

Why Pros Choose LORD Fusor Adhesives 2-Part, Super Fast

  • Versatile expands to ten times its size, retains memory with no shrinkage
  • Excellent appearance matches OEM sound deadening foams
  • Environmentally resistant will not absorb moisture or cause corrosion

How to Use

For sound deadening, sealing/filling of door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area

  1. Clean the substrate (ABS, aluminum, OEM, primer-coated steel) to remove oil, dust, and loose material; ensure a dry surface.
  2. Dispense equal amounts of the two cartridge components into a clean mixing cup and stir until a uniform black foam is achieved. The mixture must be used within the 10-second work time at 70 °F (21 °C).
  3. Apply the mixed foam in a single, continuous coat to the prepared area using a suitable applicator (e.g., spatula or dispensing tip). Do not exceed the 10-second working window.
  4. Allow the foam to cure for 1 hour at 70 °F (21 °C) before handling or applying additional layers.
  5. If removal of excess material is required, clean uncured foam with a compatible solvent such as acetone; cured foam must be mechanically removed.

Compatibility

Compatible paint systems: Urethane.

Specifications

Technical specifications for Fusor® 124 2-Part Super Fast Flexible Foam, 1.7 oz Cartridge, Black, 1 hr Curing
Part No. 124
Product Line FUS
MFR Model 80849810011
Standard/Approvals GHS Hazard
Application For sound deadening, sealing/filling of door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area
Manufacturer LORD Fusor Adhesives
UPC 80849810011
Brand Fusor®
Applicable Materials 2K Primer, Urethane 2K Chemistry
Composition 1 to 5% Amine Catalyst, 1 to 5% Tin Catalyst (Part A), 30 to 35% 4,4'-Diphenylmethane Diisocyanate, 20 to 25% 2,2,4-Trimethyl-1,3-Pentanediol Diisobutyrate, 10 to 15% Diphenylmethane Diisocyanate, 5 to 10% Aromatic Polyisocyanate (Part B)
Application Time 10 s at 70 deg F
Component 2K
Odor/Scent Aromatic
Color Black
Flash Point 201 deg F
Container Size (oz) 1.7
Container Type Cartridge
Form Liquid
Type 2-Part, Super Fast
Curing Time 1 hr at 70 deg F
Cure Time
1 hr @ 70 °F (21 °C)
Work Time
10 sec @ 70 °F (21 °C)
Compatible Substrates
ABS, aluminum, OEM, primer, steel

About LORD Fusor Adhesives

LORD Fusor Adhesives is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What substrates can I bond with Fusor® 124?

It is approved for ABS, aluminum, OEM-finished parts, primed surfaces, and steel.

How long does it take to cure?

The adhesive reaches full cure in 1 hour at 70 °F (21 °C).

What personal protective equipment is required when using this product?

Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator as recommended in the SDS.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

How to apply

Steps

1Clean both surfaces to bare, dry substrate.
2Load the cartridge and fit the mixing nozzle.
3Apply an even bead (or clamp) where needed.
4Tool or smooth the joint before it skins over.
5Allow to cure fully before stressing or painting.
Specifications

Full data

BrandLORD Fusor Adhesives
Part number80849810011
UPC80849810011
ApplicationFor sound deadening, sealing/filling of door skins to crash bar, hood
Size1.7 oz
ColorBlack
OriginUS
ConditionNew
Applicable Materials2K Primer, Urethane 2K Chemistry
SKUFUS.124.EA
Frequently asked

Good to know

The curing time for this Fusor product is 1 hr at 70 deg F. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships this Fusor product in a 1.7 container. Check the autofxmart catalog for other sizes and bulk pricing.
The MPN for this Fusor product is 124. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.