Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
LORD Fusor Adhesives

LORD Fusor Adhesives Fusor 140 Fast Sandable Bonding Adhesive 1.7 oz Clear Paste Cartridge

$57.36
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

LORD Fusorยฎ 140/141 clear plastic bonding adhesive can be used for structural bonding of bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects.

Fusorยฎ 140 Fast Sandable Bonding Adhesive is a two-component structural adhesive designed for rapid panel bonding and collision repair applications. This clear paste formula delivers reliable adhesion across multiple automotive substrates including steel, aluminum, ABS plastic, and primed surfaces, making it ideal for mixed-material repairs and panel replacement work.

The fast-cure formulation achieves handling strength in 30 minutes at 70ยฐF, allowing technicians to sand and proceed with bodywork quickly to maintain efficient cycle times. The sandable finish integrates seamlessly into standard refinishing processes, eliminating the need for additional surface preparation steps. Each 1.7 oz cartridge provides consistent mixing ratios and precise application control for professional results.

Why Pros Choose LORD Fusor Adhesives Fast Sandable

  • Clear urethane, non-yellowing structural adhesive
  • Super fast cure
  • High-strength, flexible bond

How to Use

For bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects

  1. Clean substrates thoroughly to remove dirt, grease, and contaminants before application
  2. Mix the 2K components according to manufacturer's ratio immediately before use
  3. Apply adhesive paste to prepared substrate surface using appropriate dispensing method
  4. Bond parts together and clamp or fixture as needed for proper contact
  5. Allow to cure for 30 minutes at 70ยฐF before handling
  6. Sand cured adhesive as needed for surface preparation

Compatibility

Compatible substrates: Plastic.

Compatible paint systems: Urethane, Acrylic, 2K.

Specifications

Technical specifications for Fusorยฎ 140 Fast Sandable Bonding Adhesive, 1.7 oz Cartridge, Paste, Clear, 2K Component, 30 min at 70 deg F Curing
Part No. 140
Product Line FUS
MFR Model 140
Standard/Approvals OEM Approved | GHS Hazard
Application For bumper tabs, emblems, body side moldings, rocker panel claddings and moldings, plastic backer panels, decorative vents, wheel opening moldings, acrylic sun visors, rear wind deflectors, medallions, door edge guards and ground effects
Manufacturer LORD Fusor Adhesives
UPC 80849810015
Brand Fusorยฎ
Maximum Sale Quantity 6
Maximum Sale Day 7
Applicable Materials Plastics, Primed and Painted Metals, Glass, Wood, Other Surfaces
Application Time 1.5 min at 70 deg F
Component 2K
Color Clear
Setting Time 5 min at 70 deg F
Flash Point ?201 deg F
Container Size (oz) 1.7
Container Type Cartridge
Form Paste
Type Fast Sandable
Curing Time 30 min at 70 deg F
Product Type
2K Bonding Adhesive
Form
Paste
Color
Clear
Package Size
1.7 oz Cartridge
Cure Time
30 minutes at 70ยฐF
Compatible Substrates
ABS, Aluminum, Plastic, Primer, Steel
Sandable
Yes

About LORD Fusor Adhesives

LORD Fusor Adhesives is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can I use this on?

Fusor 140 bonds to ABS, aluminum, plastic, primer, and steel substrates. Clean and prepare surfaces according to manufacturer recommendations for optimal adhesion.

How long does it take to cure?

This adhesive cures in 30 minutes at 70ยฐF. Cure time may vary with temperature - higher temperatures will accelerate cure, while lower temperatures will extend cure time.

Can I sand and paint over it?

Yes, Fusor 140 is sandable once fully cured. The clear finish allows for sanding and accepts paint systems for body shop refinishing applications.

What type of adhesive is this?

This is a 2-component (2K) structural bonding adhesive with a paste consistency. It provides fast cure times while maintaining sandability for body repair work.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Cure & dry schedule

Timing at 77ยฐF

Work Time
90 seconds
Handling
5 minutes
Sandable
30 minutes
Paintable
30 hours
Full Cure
24 hours
How to apply

Steps

1Clean both surfaces to bare, dry substrate.
2Load the cartridge and fit the mixing nozzle.
3Apply an even bead (or clamp) where needed.
4Tool or smooth the joint before it skins over.
5Allow to cure fully before stressing or painting.
Specifications

Full data

BrandLORD Fusor Adhesives
Part number140
UPC80849810015
ApplicationFor bumper tabs, emblems, body side moldings, rocker panel claddings a
Size1.7 oz
ColorClear
OriginUS
ConditionNew
Applicable MaterialsPlastics, Primed and Painted Metals, Glass, Wood, Other Surfaces
SKUFUS.140.EA
Frequently asked

Good to know

this Fusor product is compatible with Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for this Fusor product is 30 min at 70 deg F. Drying and curing times may vary with temperature, humidity, and film thickness โ€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships this Fusor product in a 1.7 container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.