Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
LORD Fusor Adhesives

Fusor 80849810106 โ€” LORD Fusor Adhesives Fusor 152 Medium Sandable Adhesive 10.1 oz Black Paste Cartridge

$79.67
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Fusorยฎ 152 adhesive is a two-component, urethane-based adhesive used for structural and cosmetic repair of bumpers, bumper tabs, and other interior and exterior plastic components.

Why Pros Choose LORD Fusor Adhesives Medium Sandable

  • Enough work time for larger repairs, ideal for hot temperature conditions
  • Urethane chemistry for all structural and cosmetic repairs on bumpers
  • Undetectable feather edge
  • Sandable in minutes
  • No need for plastic identification with use of Fusorยฎ 602EZ
  • On demand cure with heat

How to Use

For bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs

Compatibility

Compatible substrates: Plastic.

Compatible paint systems: Urethane.

Specifications

Technical specifications for Fusorยฎ 152 Repair Adhesive, 10.1 oz Cartridge, Black, Paste
Part No. 152
Product Line FUS
MFR Model 80849810106
Standard/Approvals GHS Hazard
Application For bumpers, bumper tabs, emblems, door trims, interior and exterior plastic repairs and cosmetic repairs
Manufacturer LORD Fusor Adhesives
Alternate Part Number-1 80849810066
UPC 66623390976
Brand Fusorยฎ
Applicable Materials Plastic Bumpers, Metton, SMC or Fiberglass Panels, Ecoat, Primed, Painted Metal
Composition 15 to 20% 4,4'-Diphenylmethane Diisocyanate, 10 to 15% Aromatic Polyisocyanate, 5 to 10% Diphenylmethane Diisocyanate(Part A), 1 to 5% Amide, 0.1 to 0.9% 8-Hydroxy Quinoline, 0.1 to 0.9% Carbon Black (Part B)
Application Time 3 to 5 min at 70 deg F
Component 2K
Color Black
Setting Time 30 min 70 deg F, 5 min at 140 deg F
Flash Point 201 deg F
Container Size (oz) 10.1
Container Type Cartridge
Form Paste
Type Medium Sandable
Curing Time 2 hr at 70 deg F, 60 min with Heat Cure

About LORD Fusor Adhesives

LORD Fusor Adhesives is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can this Fusor product be used on?

this Fusor product is compatible with Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.

What is the cure or dry time for this Fusor product?

The curing time for this Fusor product is 2 hr at 70 deg F, 60 min with Heat Cure. Drying and curing times may vary with temperature, humidity, and film thickness โ€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.

What size does this Fusor product come in?

This listing ships this Fusor product in a 10.1 container. Check the autofxmart catalog for other sizes and bulk pricing.

What is the manufacturer part number (MPN) for this Fusor product?

The MPN for this Fusor product is 152. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

Documents & Safety

Why Buy from autofxmart

How to apply

Steps

1Clean both surfaces to bare, dry substrate.
2Load the cartridge and fit the mixing nozzle.
3Apply an even bead (or clamp) where needed.
4Tool or smooth the joint before it skins over.
5Allow to cure fully before stressing or painting.
Specifications

Full data

BrandLORD Fusor Adhesives
Part number80849810106
UPC66623390976
ApplicationFor bumpers, bumper tabs, emblems, door trims, interior and exterior p
Size10.1 oz
ColorBlack
OriginUS
ConditionNew
Alternate Part Number-180849810066
SKUFUS.152.EA
Frequently asked

Good to know

this Fusor product is compatible with Fiberglass, Plastic, SMC, E-Coat. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for this Fusor product is 2 hr at 70 deg F, 60 min with Heat Cure. Drying and curing times may vary with temperature, humidity, and film thickness โ€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships this Fusor product in a 10.1 container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.