SEM
SEM Integral Nut Square Mixing Tip 70011, 5-1/2 in L Nozzle for 7 & 10 oz Two-Component Cartridges
No reviews yet
WARNING: Cancer & Reproductive Harm
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Ensures proper mix for all two component 7 and 10 oz cartridges Easy trim tip for different bead size Accepts versa tip to create tape beads
The SEM 70011 Integral Nut Square Static Mixing Tip is a 5-½-inch nozzle designed for precise, high-volume static mixing of two-component automotive coatings. It fits standard SEM integral nut systems and provides consistent metering for body shop applications such as primer, filler, and topcoat blends.
Key technical advantages include a 90-minute work window that allows ample time for mixing and application before the material begins to set, followed by a full cure in 24 hours. The tip is formulated with zero VOC emissions and is compatible with a broad range of substrates-including aluminum, bare metal, e-coat, fiberglass, galvanized steel, OEM finishes, primers, SMC, and standard steel-making it suitable for most repair and refinishing projects.
Use appropriate personal protective equipment (gloves, goggles, and respirators as required) and ensure adequate ventilation when dispensing the product to control aerosol exposure. Follow all safety data sheet guidelines for handling and disposal.
Why Pros Choose SEM Integral Nut Square Static
- Ensures proper mix ratio
- Easy trim tip for different bead size
- Accepts versa tip to create tape beads
How to Use
For use with 7 and 10 oz two component cartridge
- Clean and degrease the substrate (aluminum, steel, galvanized, etc.) to remove all oils, rust, and contaminants.
- Attach the SEM® 70011 Integral Nut Square Static Mixing Tip to a compatible dispensing gun; no mixing ratio is required because the tip provides static blending.
- Dispense the material within the 90-minute work window. Apply an even coat over the prepared surface using the static mixer tip.
- Allow the coating to flash for the recommended time (not specified) and then let it cure undisturbed for 24 hours before handling or applying additional layers.
Specifications
| Part No. | 70011 |
|---|---|
| Product Line | SEM |
| MFR Model | 70011 |
| Application | For use with 7 and 10 oz two component cartridge |
| Manufacturer | SEM |
| UPC | 646786700118 |
| Brand | SEM® |
| Maximum Sale Quantity | 6 |
| Maximum Sale Day | 7 |
| Material | Plastic |
| Type | Integral Nut Square Static |
- Cure Time
- 24 hr
- Work Time
- 90 min
- VOC
- Zero VOC
- Compatible Substrates
- Aluminum, bare metal, e-coat, fiberglass, galvanized, OEM, primer, SMC, steel
About SEM
SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.
Frequently Asked Questions
What substrates can I apply the SEM® 70011 Integral Nut Square Static Mixing Tip to?
The tip is compatible with aluminum, bare metal, e-coat, fiberglass, galvanized steel, OEM finishes, primer, SMC, and steel surfaces.
How long does the product take to cure?
Full cure is achieved in approximately 24 hours at typical shop conditions.
What is the usable work time after mixing?
The material remains workable for about 90 minutes (flash time) before it begins to set.
Does this product contain any volatile organic compounds (VOCs)?
No. The formulation is zero-VOC, making it suitable for low-emission shop environments.
Documents & Safety
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Read the product's instructions before first use.
2Set it up and check fittings/connections.
3Use steady, even technique for consistent results.
4Clean after use to keep it performing.
5Store dry and protected between jobs.
Specifications
Full data
Frequently asked
Good to know
Most in-stock orders for SEM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SEM products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SEM is 70011. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
