Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
SEM

XXX 77793 — SEM Gel Adhesive Remover 20 oz Aerosol Can Clear Formula

$21.98
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

XXX specialty gel adhesive remover is a solvent-based gel for removing adhesive residue as well as tar, sap, silicone, grease and oil from interior or exterior surfaces. Gel formula stays in place on vertical and horizontal panels and evaporates slower than typical solvent adhesive remover.

SEM 77793 Specialty Gel Adhesive Remover is a clear, aerosol-delivered formulation designed to soften and dissolve cured gel adhesives on automotive panels. The 20 oz can provides targeted application for rapid removal of adhesive residues during panel preparation and repair.

The remover is compatible with aluminum, OEM-finished surfaces, plastic, and steel substrates, allowing use across a wide range of body shop applications. With a VOC content of 700.1 g/L, it delivers effective solvency while meeting typical emission guidelines. The aerosol delivery ensures uniform coverage and quick penetration, facilitating efficient cleanup without excessive material waste.

Handling requires full PPE: eye protection, chemical-resistant gloves, protective clothing, and a respirator in well-ventilated areas. The product is classified with multiple GHS hazards (acute toxicity, skin corrosion, eye damage, flammable gas) and has a flash point of -103 °C. Follow all H-statements (H222, H280, H304, H315, H319, H336, H340, H350) and SDS first-aid instructions for inhalation, skin contact, eye exposure, and ingestion.

Why Pros Choose SEM Specialty Gel

  • Unique gel improves efficiency and eliminates product waste
  • 50 state compliant
  • Slow evaporating formula stays wet long enough to soften adhesive
  • Run-resistant gel stays where you spray it
  • Quick acting
  • Dissolves adhesive residue, tar, sap and more

How to Use

For use on interior or exterior surfaces, plastic, leather, vinyl, OEM panels, glass, bare aluminum, bare steel

Compatibility

Compatible paint systems: Solvent.

Specifications

Technical specifications for XXX 77793 Specialty Gel Adhesive Remover, 20 oz Aerosol Can, Clear
Part No. 77793
Product Line SEM
Application For use on interior or exterior surfaces, plastic, leather, vinyl, OEM panels, glass, bare aluminum, bare steel
Manufacturer SEM
UPC 646786777936
Brand XXX
Maximum Sale Quantity 12
Maximum Sale Day 7
Composition 30 to 40% Acetone, 13 to 30% Xylene, 13 to 30% Solvent Naphtha (Petroleum), Light Aliph, 7 to 10% Petroleum Gases, Liquefied, Sweetened
VOC Compliant (Y/N) Y
Odor/Scent Characteristic
Color Clear
Flash Point -103 deg C
Container Size (oz) 20
Container Type Aerosol Can
Form Aerosol
Type Specialty Gel
VOC
700.1 g/L
Compatible Substrates
Aluminum, OEM, Plastic, Steel

About SEM

SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.

Frequently Asked Questions

What substrates can I safely use this gel adhesive remover on?

It is compatible with aluminum, OEM-finished surfaces, plastic, and steel.

What personal protective equipment is required when applying this product?

Use eye protection, chemical-resistant gloves, protective clothing, and a respirator as recommended in the SDS.

How should I store the aerosol can to maintain its effectiveness?

Store the product in a cool, dry place away from heat sources. The shelf-life guidance indicates it must be kept under these conditions.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean both surfaces to bare, dry substrate.
2Load the cartridge and fit the mixing nozzle.
3Apply an even bead (or clamp) where needed.
4Tool or smooth the joint before it skins over.
5Allow to cure fully before stressing or painting.
Specifications

Full data

BrandSEM
Part number77793
UPC646786777936
ApplicationFor use on interior or exterior surfaces, plastic, leather, vinyl, OEM
Size20
ColorClear
OriginUS
ConditionNew
VOC Compliant (Y/N)Y
SKUSEM.77793.CN
Frequently asked

Good to know

This listing ships SEM in a 20 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
The MPN for SEM is 77793. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.