Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity

Country

Business accountsNow openApply
SEM

SEM Bumper Coater 39083 Trim Paint 16 oz Gloss Black Aerosol

$30.35
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Bumper coater aerosols are a line of advanced coatings formulated to restore the OEM finish on automotive bumpers and plastic cladding.

Bumper Coaterβ„’ 39083 Trim Paint is a 16-oz aerosol gloss black formulated for rapid, high-quality finish on bumper trim and other exterior plastic components. Designed for body shop technicians who need consistent color match and durable coverage in a single-use can.

The formulation offers a flash time of 5-10 minutes between coats and provides approximately 10 sq ft per can at a film thickness of 1 mil dry film thickness (dft). With a VOC level of 701 g/L, it meets stringent emissions requirements while delivering excellent adhesion to OEM plastics, primed surfaces, and other compatible substrates.

Use in a well-ventilated area; the product is classified as flammable with a flash point of -42 Β°C. Required personal protective equipment includes eye protection, gloves, protective clothing, and a respirator. Follow H-statements H222, H280, H304, H315, H336, H351, H361, and H373 for safe handling.

Why Pros Choose SEM SEM

  • No adhesion promoter required
  • No primer required
  • Excellent adhesion and durability
  • Matches OEM appearance
  • Retains flexibility
  • Great coverage
  • Professional results

Application Guide

  1. Clean the bumper surface and ensure it is free of dust, oil, and loose material; compatible substrates include OEM plastic and primed surfaces.
  2. Apply the first coat using a smooth, overlapping spray pattern from the aerosol can.
  3. Allow a flash time of 5-10 minutes before applying additional coats.
  4. If a second coat is required for coverage or gloss, apply it using the same spraying technique.
  5. After the final coat, allow the paint to cure according to the product's recommended drying conditions (minimum 5 minutes between coats).
  6. Dispose of any residual material and clean equipment with cleaning agents that meet VOC regulations.

Compatibility

Compatible substrates: Plastic.

Specifications

Technical specifications for Bumper Coaterβ„’ 39083 Trim Paint, 16 oz Aerosol Can, Gloss Black
Part No. 39083
Product Line SEM
MFR Model 39083
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm
Manufacturer SEM
UPC 646786390838
Brand Bumper Coaterβ„’
Solids Content 8.6%
Color Gloss Black
Container Size (oz) 16
Curing Time 5 to 10 min Flash Time
Coverage (sq-ft) 20
Flash Time
5-10 minutes between coats
Coverage
10 sq ft per can @ 1 mil dry film thickness
VOC
701 g/L
Compatible Substrates
OEM, plastic, primer

About SEM

SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair β€” the go-to choice for interior and trim refinishing.

Frequently Asked Questions

What surfaces can I use Bumper Coaterβ„’ 39083 on?

It is compatible with OEM plastics, primed substrates, and other plastic components typically found on vehicle bumpers.

How long should I wait between coats?

The recommended flash time is 5-10 minutes between coats under normal shop conditions.

What PPE is required when applying this aerosol?

Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors.

Can I sand or paint over Bumper Coaterβ„’ after it dries?

Yes. Once the coating has flashed (5-10 min) and fully cured, it can be lightly sanded and top-coated with compatible automotive paints.

What is the coverage rate for a 16 oz can?

A single 16 oz aerosol provides approximately 10 sq ft of coverage at a film thickness of 1 mil dry film thickness (dft).

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandSEM
Part number39083
UPC646786390838
ApplicationBumper coater aerosols are a line of advanced coatings formulated to r
Size16
ColorGloss Black
OriginUS
ConditionNew
Solids Content8.6%
SKUSEM.39083.CN
Frequently asked

Good to know

SEM is compatible with Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for SEM is 5 to 10 min Flash Time. Drying and curing times may vary with temperature, humidity, and film thickness β€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships SEM in a 16 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet β€” be the first to review this product.