
Built for the job.
Bumper coater aerosols are a line of advanced coatings formulated to restore the OEM finish on automotive bumpers and plastic cladding.
Bumper Coater™ 39163 Trim Paint is a 16 oz aerosol formulated for medium-smoke trim applications on OEM plastic bumpers and other compatible substrates. It provides a uniform, high-gloss finish suitable for factory-matched color repairs.
The spray delivers approximately 10 sq ft per can at 1 mil dry film thickness, with a flash time of 5-10 minutes between coats, allowing rapid build-up without compromising adhesion. It is compatible with OEM plastics and primers, offering consistent coverage while maintaining a VOC level of 701 g/L.
Use in a well-ventilated area and wear eye protection, gloves, protective clothing, and a respirator as required by the SDS. The product is classified as flammable (flash point -42 °C) and carries multiple GHS hazards; follow H-statements H222, H280, H304, H315, H336, H351, H361, and H373 for safe handling.
Why pros choose it
- No adhesion promoter required
- No primer required
- Excellent adhesion and durability
- Matches OEM appearance
- Retains flexibility
- Great coverage
- Professional results
Application Guide
- Clean the bumper surface thoroughly and ensure it is dry; verify that the substrate is OEM plastic or has an approved primer.
- Apply the first coat of Bumper Coater™ 39163 using a steady, even spray from the aerosol can.
- Allow 5-10 minutes flash time before applying additional coats.
- Apply subsequent coats as needed to achieve coverage (approximately 10 sq ft per can at 1 mil dry film thickness).
- After completion, clean equipment and any overspray with cleaning materials that meet VOC regulations.
Compatibility
Compatible substrates: Plastic.
Specifications
| Part No. | 39163 |
|---|---|
| Product Line | SEM |
| MFR Model | 39163 |
| Standard/Approvals | California Pro65 Warning: Cancer and Reproductive Harm |
| Manufacturer | SEM |
| UPC | 646786391637 |
| Brand | Bumper Coater™ |
| Solids Content | 8.6% |
| Color | Medium Smoke |
| Container Size (oz) | 16 |
| Curing Time | 5 to 10 min Flash Time |
| Coverage (sq-ft) | 20 |
- Flash Time
- 5-10 min between coats
- Coverage
- 10 sq ft per can @ 1 mil dft
- VOC
- 701 g/L
- Compatible Substrates
- OEM, plastic, primer
About SEM
SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.
Frequently Asked Questions
What substrates can Bumper Coater™ 39163 be applied to?
It is compatible with OEM plastic parts, primed surfaces, and other plastics typically used for trim.
How long should I wait between coats?
The flash time is 5-10 minutes between coats under normal shop conditions.
What is the coverage rate for a 16-oz aerosol can?
A single can will cover approximately 10 sq ft at a film thickness of 1 mil dry film thickness (dft).
What personal protective equipment is required when using this product?
Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors.
Documents & Safety
- Safety Data Sheet (SDS)
- bumpercoater_39073_specification_sheet.pdf
- 39023%20-%2039583%20TPO-Direct%20Bumper%20CoatersUSA.pdf
The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.
Why Buy from autofxmart
- Expert support — questions? Email us at support@autofxmart.com.
Technical and safety documents
- Safety Data Sheet (SDS) — revision 06/21/2017
Steps
Full data
Good to know
What Our Customers Say
No reviews yet — be the first to review this product.
