Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
SEM

Bumper Coater 39193 — SEM Trim Paint Dark Gray 16 oz Aerosol - 20 sq-ft coverage

$30.35
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Bumper coater aerosols are a line of advanced coatings formulated to restore the OEM finish on automotive bumpers and plastic cladding.

Bumper Coater™ 39193 Trim Paint is a 16-oz aerosol formulated for fast, uniform color matching of dark gray trim and bumper surfaces. It is designed for professional body shop use where precise coverage and quick turnaround are essential.

The paint delivers up to 10 sq ft per can at a film thickness of 1 mil dry film thickness (dft) with a flash time of 5-10 minutes between coats, allowing rapid build-up on OEM plastic or primed substrates. Its VOC content is 701 g/L, and it adheres well to OEM plastics, standard primers, and other compatible surfaces.

Due to its flammable nature (flash point -42 °C) and listed GHS hazards, proper personal protective equipment-eye protection, gloves, protective clothing, and a respirator-is required. Apply in a well-ventilated area and follow the SDS handling instructions for safe use.

Why Pros Choose SEM SEM

  • No adhesion promoter required
  • No primer required
  • Excellent adhesion and durability
  • Matches OEM appearance
  • Retains flexibility
  • Great coverage
  • Professional results

Application Guide

  1. Clean the bumper surface using a VOC-compliant cleaning material to remove contaminants.
  2. Ensure the substrate is compatible (OEM plastic or primed surface) and dry.
  3. Apply the first coat of Bumper Coater™ 39193 Trim Paint with an aerosol can, maintaining a uniform spray pattern.
  4. Allow a flash time of 5-10 minutes before applying additional coats.
  5. Apply subsequent coats as needed to achieve coverage; each coat requires the same 5-10 minute flash interval.
  6. After finishing, clean the spray nozzle with a VOC-compliant cleaning material.

Compatibility

Compatible substrates: Plastic.

Specifications

Technical specifications for Bumper Coater™ 39193 Trim Paint, 16 oz Aerosol Can, Dark Gray
Part No. 39193
Product Line SEM
MFR Model 39193
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm
Manufacturer SEM
UPC 646786391934
Brand Bumper Coater™
Solids Content 8.6%
Color Dark Gray
Container Size (oz) 16
Curing Time 5 to 10 min Flash Time
Coverage (sq-ft) 20
Flash Time
5-10 min between coats
Coverage
10 sq ft per can @ 1 mil dry film thickness
VOC
701 g/L
Compatible Substrates
OEM, plastic, primer

About SEM

SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.

Frequently Asked Questions

What substrates can Bumper Coater™ 39193 be applied to?

It is compatible with OEM plastics, primed surfaces, and other plastic trim components.

How long should I wait between coats?

The recommended flash time is 5-10 minutes before applying the next coat.

What personal protective equipment is required when spraying this aerosol?

Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors.

How much area does one 16 oz can cover?

One can provides approximately 10 sq ft of coverage at a film thickness of 1 mil dry film thickness (dft).

Can the coating be sanded and repainted?

After the paint has fully cured, it can be sanded and over-coated with compatible topcoats. Follow standard sanding procedures for plastic trim.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandSEM
Part number39193
UPC646786391934
ApplicationBumper coater aerosols are a line of advanced coatings formulated to r
Size16
ColorDark Gray
OriginUS
ConditionNew
Solids Content8.6%
SKUSEM.39193.CN
Frequently asked

Good to know

SEM is compatible with Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for SEM is 5 to 10 min Flash Time. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships SEM in a 16 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.