
Built for the job.
Bumper coater aerosols are a line of advanced coatings formulated to restore the OEM finish on automotive bumpers and plastic cladding.
Bumper Coater™ 39253 Trim Paint is a 16 oz aerosol formulated for medium titanium metallic finishes on bumper trim and other exterior plastic components. It is designed for OEM-type plastics and can be applied over compatible primers to achieve a durable, color-matched coating.
The paint offers a flash time of 5-10 minutes between coats and provides approximately 10 sq ft per can at a film thickness of 1 mil dry film thickness (dft). Its formulation is compatible with standard OEM plastics, pre-treated plastic substrates, and primer layers, delivering consistent coverage while maintaining the required VOC limit of 701 g/L.
Application requires adequate ventilation and the use of personal protective equipment: eye protection, gloves, protective clothing, and a respirator are mandatory due to acute toxicity, flammability, and carcinogenic hazards. Follow all H-statements (H222, H280, H304, H315, H336, H351, H361, H373) for safe handling.
Why Pros Choose SEM SEM
- No adhesion promoter required
- No primer required
- Excellent adhesion and durability
- Matches OEM appearance
- Retains flexibility
- Great coverage
- Professional results
Application Guide
- Ensure the substrate (OEM plastic or primed surface) is clean, dry, and free of contaminants.
- Apply the first coat of Bumper Coater™ 39253 using a consistent spray pattern; allow 5-10 minutes flash time before recoating.
- Apply additional coats as needed to achieve full coverage, observing the same 5-10 minute flash time between each coat.
- Clean spray equipment with solvents or cleaning agents that meet applicable VOC regulations.
Compatibility
Compatible substrates: Plastic.
Specifications
| Part No. | 39253 |
|---|---|
| Product Line | SEM |
| MFR Model | 39253 |
| Standard/Approvals | California Pro65 Warning: Cancer and Reproductive Harm |
| Manufacturer | SEM |
| UPC | 646786392535 |
| Brand | Bumper Coater™ |
| Solids Content | 8.6% |
| Color | Medium Titanium Metallic |
| Container Size (oz) | 16 |
| Curing Time | 5 to 10 min Flash Time |
| Coverage (sq-ft) | 20 |
- Flash Time
- 5-10 minutes between coats
- Coverage
- 10 sq ft per can @ 1 mil dry film thickness
- VOC
- 701 g/L
About SEM
SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.
Frequently Asked Questions
What substrates can Bumper Coater™ 39253 be applied to?
It is compatible with OEM plastics, pre-primed surfaces, and standard automotive primers.
How long should I wait between coats?
The recommended flash time is 5-10 minutes between applications.
What is the coverage rate for one can?
One 16-oz aerosol provides approximately 10 sq ft at a film thickness of 1 mil dry film thickness (dft).
What personal protective equipment is required when spraying this product?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator suitable for organic vapors.
Documents & Safety
- Safety Data Sheet (SDS)
- bumpercoater_39073_specification_sheet.pdf
- 39023%20-%2039583%20TPO-Direct%20Bumper%20CoatersUSA.pdf
The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.
Why Buy from autofxmart
- Expert support — questions? Email us at support@autofxmart.com.
Technical and safety documents
- Safety Data Sheet (SDS) — revision 06/21/2017
Steps
Full data
Good to know
What Our Customers Say
No reviews yet — be the first to review this product.
