Overview
Built for the job.
Bumper coater aerosols are a line of advanced coatings formulated to restore the OEM finish on automotive bumpers and plastic cladding.
Bumper Coater™ 39263 Trim Paint is a 16-oz aerosol formulated for rapid color matching and finish on automotive bumpers and trim. The dark titanium metallic pigment delivers a uniform, high-gloss appearance suitable for OEM plastic components and pre-primed surfaces.
Technical advantages include a flash time of 5-10 minutes between coats and coverage of approximately 10 sq ft per can at 1 mil dry film thickness. The formulation is compatible with OEM plastics, existing primer layers, and standard automotive substrates, providing consistent flow and adhesion without additional surfacing preparation.
Use in a well-ventilated area; the product contains VOCs (701 g/L) and has a flash point of -42 °C. Required PPE includes eye protection, gloves, protective clothing, and a respirator rated for organic vapors. Follow standard first-aid procedures for inhalation, skin contact, eye exposure, or ingestion as outlined in the SDS.
Why Pros Choose SEM SEM
- No adhesion promoter required
- No primer required
- Excellent adhesion and durability
- Matches OEM appearance
- Retains flexibility
- Great coverage
- Professional results
Application Guide
- Clean the bumper surface and ensure it is free of dust, oil, and loose material; verify that the substrate is OEM plastic or previously primed.
- Apply a suitable primer if not already present, allowing it to cure according to its specifications before proceeding.
- Shake the 16 oz aerosol can thoroughly, then spray Bumper Coater™ Trim Paint evenly at the recommended distance.
- Allow 5-10 minutes flash time between coats; apply additional coats as needed to achieve full coverage (approximately 10 sq ft per can at 1 mil dry film thickness).
- After final coat, clean spray equipment and any spills with cleaning materials that comply with VOC regulations.
Compatibility
Compatible substrates: Plastic.
Specifications
| Part No. | 39263 |
|---|---|
| Product Line | SEM |
| MFR Model | 39263 |
| Standard/Approvals | California Pro65 Warning: Cancer and Reproductive Harm |
| Manufacturer | SEM |
| UPC | 646786392634 |
| Brand | Bumper Coater™ |
| Solids Content | 8.6% |
| Color | Dark Titanium Metallic |
| Container Size (oz) | 16 |
| Curing Time | 5 to 10 min Flash Time |
| Coverage (sq-ft) | 20 |
- Flash Time
- 5-10 minutes between coats
- Coverage
- 10 sq ft per can @ 1 mil dry film thickness
- VOC
- 701 g/L
- Compatible Substrates
- OEM, plastic, primer
About SEM
SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.
Frequently Asked Questions
What substrates are compatible with Bumper Coater™ 39263 Trim Paint?
The aerosol is formulated for use on OEM plastic trim, pre-primed surfaces, and other compatible plastics. It adheres directly to the original equipment material or a suitable primer.
What is the recommended flash time between coats?
Allow 5-10 minutes of flash time between applications under normal shop conditions before applying the next coat.
How much area does one 16-oz can cover?
One can provides approximately 10 sq ft (0.93 m²) of coverage at a film thickness of 1 mil dry film thickness.
What personal protective equipment is required when applying this product?
Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors. The product is classified with multiple GHS hazards including flammability and acute toxicity.
Documents & Safety
- Safety Data Sheet (SDS)
- bumpercoater_39073_specification_sheet.pdf
- 39023%20-%2039583%20TPO-Direct%20Bumper%20CoatersUSA.pdf
Danger - This aerosol contains highly flammable solvent vapors and toxic ingredients that can be harmful if inhaled, swallowed, or absorbed through the skin. Wear safety glasses or goggles, chemical-resistant gloves, a long-sleeve protective suit, and a suitable respirator rated for organic vapors. Avoid breathing mist, skin contact, and eye exposure; it is also hazardous to aquatic life and may cause serious health effects with prolonged exposure. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
SEM is compatible with Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for SEM is 5 to 10 min Flash Time. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships SEM in a 16 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SEM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SEM products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
