SEM
SEM Classic Coat Ivory Flexible Coating 17293 16 oz Aerosol Can
No reviews yet
Hazardous material · Aerosol
Aerosol hazmat ships ground-only via UPS/FedEx with a per-item carrier surcharge applied at checkout.
Shipping restrictions apply
Ground freight only (UPS/FedEx). Cannot ship via Air, USPS, or to PO boxes. APO/FPO addresses excluded.
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
Classic Coat uses advanced technology to provide superior adhesion and flexibility when changing or restoring the color of most leather and vinyl. Classic Coat is a fade resistant coating that won't chip or peel and is available in many of today's popular OEM colors.
Classic Coat™ 17293 Flexible Coating is a 16 oz aerosol spray formulated for quick, durable repairs on OEM and plastic automotive components. The ivory-tone finish provides a flexible film that conforms to substrate movement while delivering a uniform appearance.
The coating cures to touch in 24 hours at 70 °F (21 °C), allowing body shop technicians to complete the repair cycle without extended downtime. Its aerosol delivery ensures consistent atomization and coverage on complex shapes, making it suitable for spot repairs, trim restoration, and protective overlays on plastic parts.
Use in a well-ventilated area with appropriate personal protective equipment: safety glasses or face shield, chemical-resistant gloves, protective clothing, and a respirator rated for aerosolized particulates. The product is classified as acute toxicity, aquatic toxicity, aspiration hazard, carcinogen, flammable gas, eye damage, organ toxicant, reproductive toxin, and skin corrosive (GHS). Follow H-statements H222, H280, H304, H315, H319, H336, H351, H361.
Why Pros Choose SEM SEM
- OEM recommended
- Excellent for vinyl and leather
- Superior adhesion, flexibility and hiding
- Will not crack
- Quick drying
- Simple to use
- Multidirectional fan spray
Application Guide
- Verify that the target is an OEM-finished or plastic substrate.
- Clean the surface thoroughly to remove dust, grease, and loose material; ensure it is dry before spraying.
- Apply Classic Coat™ 17293 from the aerosol can using a steady, overlapping spray pattern. Apply one uniform coat.
- Allow the coating to flash for the recommended time (refer to product label) before applying additional coats if needed.
- After the final coat, let the part cure undisturbed for 24 hours at 70 °F (21 °C).
Specifications
| Part No. | 17293 |
|---|---|
| Product Line | SEM |
| MFR Model | 17293 |
| Standard/Approvals | California Pro65 Warning: Cancer | GHS and OSHA Hazard |
| Application | For in-car repairs |
| Manufacturer | SEM |
| UPC | 646786172939 |
| Brand | Classic Coat™ |
| Use For | Leather, Vinyl Substrates |
| Rubberized | No |
| Solids Content | 8.1% |
| Color | Ivory |
| Container Size (oz) | 16 |
| Container Type | Aerosol Can |
| Form | Aerosol |
- Cure Time
- 24 hr @ 70°F (21°C)
- Shelf Life
- Store in a cool, dry place with adequate ventilation
- Compatible Substrates
- OEM, plastic
About SEM
SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.
Frequently Asked Questions
What substrates can Classic Coat™ 17293 Flexible Coating be applied to?
It is compatible with OEM finishes and plastic substrates.
How long does the coating take to cure?
The full cure time is 24 hours at 70 °F (21 °C).
What personal protective equipment is required when applying this aerosol?
Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator as specified in the SDS.
Can I sand or paint over Classic Coat™ after it cures?
Once fully cured (24 hours at 70 °F), the coating can be sanded and painted according to standard body shop practices.
Documents & Safety
- Safety Data Sheet (SDS)
- colorcoat_13001_catalog.pdf
- classiccoat_17013_specification_sheet.pdf
- classiccoat_17013_technical_bulletin.pdf
Danger: This aerosol contains highly flammable propellant and chemicals that are toxic if inhaled or swallowed, can cause serious eye damage, skin burns, and may be a carcinogen. Use safety glasses, chemical-resistant gloves, protective clothing, and a suitable respirator when applying. Avoid release of vapors into the environment. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
This listing ships SEM in a 16 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Most in-stock orders for SEM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
Yes. autofxmart is an authorized distributor of SEM products. Every unit is factory-fresh, sealed, and backed by the manufacturer's standard warranty. If you have a concern, contact support@autofxmart.com and we will make it right.
The MPN for SEM is 17293. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
