Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity

Country

Business accountsNow openApply
SEM

SEM Dual-Mix 39337 2-Component Panel Adhesive 7 oz Black Cartridge

$88.80
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Dual-Mixβ„’ Door Skin and SMC Adhesive is a two-component epoxy that quickly bonds any combination of steel, aluminum, fiberglass, and SMC.

Dual-Mixβ„’ 39337 is a two-component panel adhesive supplied in a 7 oz cartridge, formulated for high-strength bonding of panels and structural repairs. It is designed for use on a wide range of substrates including aluminum, bare metal, e-coat, fiberglass, OEM plastics, primer, SMC, and steel.

The system provides a 60-minute work window with flash set in approximately 30 minutes, allowing ample placement time. Sandable after 15 minutes, the adhesive reaches full cure in 48 hours while maintaining zero VOC emissions. Its formulation delivers exceptional impact resistance and reliable adhesion across all listed materials.

Due to its acute toxicity profile, operators must wear eye protection, chemical-resistant gloves, protective clothing, and a respirator in a well-ventilated area. Follow H301, H314, H317, H318, H335, H341, H351, and H361 hazard statements for safe handling.

Why Pros Choose SEM 2-Component

  • Dual-Mixβ„’ forever warranty
  • OEM recommended
  • Non-sag formulation
  • Excellent corrosion protection
  • Bonds multiple substrates
  • Extended 2 years shelf life

How to Use

For MIG or STRSW welding

  1. Clean and degrease the substrate; ensure it is one of the compatible materials (aluminum, bare metal, e-coat, fiberglass, OEM plastic, primer, SMC, steel).
  2. Apply the adhesive with a suitable dispensing gun. The product provides 60 min of work time.
  3. If additional coats are required, apply them within the 30 min open-time window before the adhesive begins to set.
  4. Allow the bond to become sandable after approximately 15 min; then lightly sand as needed before final handling.
  5. Full cure is achieved after 48 hr at ambient temperature. Do not subject the joint to load or finish work until this time has elapsed.

Compatibility

Compatible substrates: Steel, Aluminum, Fiberglass, SMC.

Compatible paint systems: Epoxy.

Specifications

Technical specifications for Dual-Mixβ„’ 39337 2-Component Panel Adhesive, 7 oz Cartridge, Liquid, Black, 30 min Application, 24 hr Curing
Part No. 39337
Product Line SEM
MFR Model 39337
Standard/Approvals GHS05 | GHS07 | GHS08 | OSHA HCS Hazard | OEM Approved | California PROP65 Warning: Cancer and Reproductive Harm
Application For MIG or STRSW welding
Manufacturer SEM
UPC 646786393372
Brand Dual-Mixβ„’
Maximum Sale Quantity 6
Maximum Sale Day 7
Applicable Materials Steel, Aluminum, SMC/Fiberglass
Composition 30 To 40% Bisphenola(chloro)oxirane Polymer, 13 To 30% Talc, 10 To 13% Ceramic Microspheres, 5 To 7% Phenol, 1.5 To 5% Benzyl Alcohol, 1.5 To 5% Fumed Silica, 1.5 To 5% Modified Diglycidal Ether,=1.5 To <5% 4-nonylphenol, Branched, 1 To 1.5% 2,2'-iminodiethylamine, 1 To 1.5% 1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane, =0.1 To <1% 3,6-diazaoctanethylenediamin, =0.1 To <1% (dimethylamino)methylphenol, =0.1 To <1% N-(3-(trimethoxysilyl)propyl)ethylenediamine
Application Time 30 min
Odor/Scent Characteristic
Color Black
Setting Time 2 hr
Flash Point 95 deg C
Container Size (oz) 7
Container Type Cartridge
Form Liquid
Type 2-Component
Curing Time 24 hr
Cure Time
48 hr
Sandable Time
15 min
Work Time
60 min
VOC
Zero VOC
Compatible Substrates
Aluminum, bare metal, e-coat, fiberglass, OEM, plastic, primer, SMC, steel

About SEM

SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair β€” the go-to choice for interior and trim refinishing.

Frequently Asked Questions

What substrates can Dual-Mixβ„’ 39337 be bonded to?

It is compatible with aluminum, bare metal, e-coat, fiberglass, OEM plastics, primer, SMC, and steel.

How long does the adhesive take to fully cure?

The full cure time is 48 hours at ambient conditions.

What personal protective equipment is required when applying this product?

Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator as specified in the SDS.

Can I sand or paint over Dual-Mixβ„’ 39337, and if so when?

The adhesive becomes sandable after about 15 minutes and can be painted once it has fully cured (48 hours).

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

Specifications

Full data

BrandSEM
Part number39337
UPC646786393372
ApplicationFor MIG or STRSW welding
Size7 oz
ColorBlack
OriginUS
ConditionNew
Applicable MaterialsSteel, Aluminum, SMC/Fiberglass
SKUSEM.39337.EA
Frequently asked

Good to know

SEM is compatible with Steel, Aluminum, Fiberglass, SMC. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for SEM is 24 hr. Drying and curing times may vary with temperature, humidity, and film thickness β€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships SEM in a 7 container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet β€” be the first to review this product.