Skip to content
Pro-grade auto-body supply Β· Any quantity
Pro-grade auto-body supply Β· Any quantity

Country

Business accountsNow openApply
SEM

SEM Dual-Mix 39357 Flexible Urethane Foam 7 oz Black Cartridge

$71.67
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Dual-Mixβ„’ Flexible Urethane Foam is a two-component, urethane, expanding foam that stops vibration and dampens sound in most voids.

Dual-Mixβ„’ 39357 Flexible Urethane Foam is a 7 oz liquid cartridge formulated for rapid fill and shaping of OEM panels and plastic substrates in collision repair. The low-viscosity mix expands to a flexible foam that provides professional-grade surface restoration before sanding or coating.

The formulation offers a work time of 15 seconds at 70 Β°F (21 Β°C) and reaches full cure in 15 minutes under the same conditions, enabling fast turnaround on repair cycles. Zero VOC content eliminates emissions concerns while delivering consistent coverage for seamless repairs on OEM and plastic parts.

Due to acute toxicity, skin corrosion, eye damage, and respiratory hazards, use requires appropriate personal protective equipment: chemical-resistant gloves, safety glasses or face shield, protective clothing, and a respirator in well-ventilated areas. Follow standard first-aid procedures for inhalation, skin, and eye exposure as outlined in the SDS.

Why Pros Choose SEM SEM

  • Dual-Mixβ„’ forever warranty
  • OEM recommended
  • Excellent sound dampening qualities
  • Stops panel flutter
  • 10x volume expansion
  • Does not require moisture to cure
  • Will not distort panels
  • Resists shrinking
  • Bonds to most substrates

How to Use

For use on plastic, primed or painted surfaces and metal

  1. Ensure the substrate (OEM or plastic) is clean, dry, and free of oil, grease, or loose material.
  2. Dispense the Dual-Mixβ„’ urethane foam from the cartridge; no additional mixing ratio is required.
  3. Apply a uniform coat using a spray gun or dispensing tip within the 15-second work window at 70 Β°F (21 Β°C).
  4. Allow the first coat to cure for 15 minutes at 70 Β°F before handling or applying additional coats if needed.
  5. After final curing, inspect for complete fill; no specific cleanup method is required beyond standard shop waste disposal.

Compatibility

Compatible paint systems: Urethane.

Specifications

Technical specifications for Dual-Mixβ„’ 39357 Flexible Urethane Foam, 7 oz Cartridge, Liquid, Black, 15 sec at 70 deg F Application
Part No. 39357
Product Line SEM
MFR Model 39357
Standard/Approvals California PROP65 Warning: Cancer and Reproductive Harm | GHS07 | GHS08 | OSHA HCS Hazard
Application For use on plastic, primed or painted surfaces and metal
Manufacturer SEM
UPC 646786393570
Brand Dual-Mixβ„’
Maximum Sale Quantity 6
Maximum Sale Day 7
Applicable Materials Plastic, Primed and Painted Surfaces, Metal
Composition 30 to 40% Polyether Polyol, 13 to 30% Polymeric MDI, 10 to 13% Diphenylmethanediisocyanate, Isomeres, Homologues, 10 to 13% Polyether Polyol, 10% Methylenediphenyl Diisocyanate
Application Time 15 sec at 70 deg F
Odor/Scent Characteristic
Color Black
Setting Time 2 min at 70 deg F
Flash Point 121 deg C
Container Size (oz) 7
Container Type Cartridge
Form Liquid
Curing Time 15 min at 70 deg F
Work Time
15 seconds @ 70 Β°F (21 Β°C)
Cure Time
15 minutes @ 70 Β°F (21 Β°C)
VOC
Zero VOC
Shelf Life
Store in a cool, dry place
Compatible Substrates
OEM, plastic
Coverage
Professional results

About SEM

SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair β€” the go-to choice for interior and trim refinishing.

Frequently Asked Questions

What substrates can I apply Dual-Mixβ„’ 39357 Flexible Urethane Foam to?

The foam is compatible with OEM plastics and other plastic substrates.

How long does the material take to cure?

Cure time is approximately 15 minutes at 70 Β°F (21 Β°C).

What personal protective equipment is required when using this product?

Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator as indicated on the SDS.

Can I sand or paint over the cured foam?

Once fully cured (15 minutes at 70 Β°F), the foam can be sanded and painted to achieve professional results.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean both surfaces to bare, dry substrate.
2Load the cartridge and fit the mixing nozzle.
3Apply an even bead (or clamp) where needed.
4Tool or smooth the joint before it skins over.
5Allow to cure fully before stressing or painting.
Specifications

Full data

BrandSEM
Part number39357
UPC646786393570
ApplicationFor use on plastic, primed or painted surfaces and metal
Size7
ColorBlack
OriginUS
ConditionNew
Applicable MaterialsPlastic, Primed and Painted Surfaces, Metal
SKUSEM.39357.EA
Frequently asked

Good to know

The curing time for SEM is 15 min at 70 deg F. Drying and curing times may vary with temperature, humidity, and film thickness β€” always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships SEM in a 7 container. Check the autofxmart catalog for other sizes and bulk pricing.
The MPN for SEM is 39357. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet β€” be the first to review this product.