Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
SEM

SEM Dual-Mix™ 40202 Quick Set 20 Clear Solid Adhesive 1.7 oz Cartridge

$39.21
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Dual-Mix™ quick set 20 is a very fast, two component, opaque, urethane adhesive designed for bumper tab repair and bonding most small plastic, steel and aluminum parts.

Dual-Mix™ Quick Set 20 is a two-component clear adhesive supplied in a 1.7 oz cartridge, designed for rapid bonding of structural and non-structural components in collision repair. It provides a fast work time for precise placement and a quick cure to return the vehicle to service.

The formulation offers a flash time of 15 seconds at 70 °F (21 °C) and reaches full strength in 15 minutes under the same conditions, allowing efficient workflow on high-volume panels. It adheres to a broad range of substrates including aluminum, steel, fiberglass, concrete, wood, OEM plastics, SMC, and other bare metals, ensuring versatility across body shop applications.

Due to its acute toxicity and classification as a carcinogen, proper personal protective equipment is required: eye protection, chemical-resistant gloves, protective clothing, and a respirator in well-ventilated areas. Follow standard first-aid procedures for inhalation, skin contact, or eye exposure as outlined in the SDS.

Why Pros Choose SEM 2-Component

  • Dual-Mix™ forever warranty
  • OEM recommended
  • High strength and sandable
  • Bonds almost anything
  • Non sag formula fills gaps
  • Colorless
  • Super fast setting

Application Guide

  1. Clean the substrate (aluminum, steel, fiberglass, wood, etc.) to remove oil, rust, dust, and moisture; ensure a dry surface.
  2. Dispense both components of the 2-component adhesive and mix thoroughly. The mixture must be used within the work time of 15 seconds (pot life).
  3. Apply a thin, even coat to the prepared area. Do not exceed one coat per cure cycle.
  4. Allow the adhesive to set for 15 minutes at 70°F (21°C) before handling or proceeding with further assembly.

Compatibility

Compatible substrates: Steel, Aluminum, Plastic.

Compatible paint systems: Urethane.

Specifications

Technical specifications for Dual-Mix™ Quick Set 20 40202 2-Component Adhesive, 1.7 oz Cartridge, Solid, Clear
Part No. 40202
Product Line SEM
MFR Model 40202
Standard/Approvals GHS and OSHA Hazard
Manufacturer SEM
Trade Mark Quick Set 20
UPC 646786402029
Brand Dual-Mix™
Applicable Materials Plastic, Bare Metal, SMC, Fiberglass, Glass, Concrete, Steel, Aluminum, Wood
Composition 30 to 40% Polymeric MDI, 30 to 40% Hydroxy Terminated Poly(Oxyalkylated)Polyol/Proprietary, 13 to 30% 4,4'-methylenediphenyl Diisocyanate, >=1.5 to <5% 3-aminomethyl-3,5,5-trimethylcyclohexylamine
Odor/Scent Characteristic
Color Clear
Setting Time 20 s at 70 deg F
Flash Point 94 deg C
Container Size (oz) 1.7
Container Type Cartridge
Form Solid
Type 2-Component
Curing Time 15 min at 70 deg F
Cure Time
15 min @ 70 °F (21 °C)
Work Time
15 sec @ 70 °F (21 °C)
Shelf Life
Store in a cool, dry place with adequate ventilation
Substrates
Aluminum, bare metal, concrete, fiberglass, OEM, plastic, SMC, steel, wood

About SEM

SEM Products specializes in paint adhesion systems, flexible coatings, and plastic repair — the go-to choice for interior and trim refinishing.

Frequently Asked Questions

What substrates can Dual-Mix™ Quick Set 20 be bonded to?

It is compatible with aluminum, bare metal, concrete, fiberglass, OEM plastics, SMC, steel and wood.

How long does it take for the adhesive to cure?

The full cure is achieved in 15 minutes at 70 °F (21 °C).

What is the usable work time after mixing?

You have approximately 15 seconds of work time at 70 °F (21 °C) before the adhesive begins to set.

What personal protective equipment is required when using this product?

Wear eye protection, chemical-resistant gloves, protective clothing and a respirator as recommended in the SDS.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

Specifications

Full data

BrandSEM
Part number40202
UPC646786402029
ApplicationDual-Mix™ quick set 20 is a very fast, two component, opaque, urethane
Size1.7
ColorClear
OriginUS
ConditionNew
Trade MarkQuick Set 20
SKUSEM.40202.EA
Frequently asked

Good to know

SEM is compatible with Steel, Aluminum, Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for SEM is 15 min at 70 deg F. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships SEM in a 1.7 container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.