Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
Transtar Autobody Technology

Transtar Panel Bond Adhesive 1738 200 mL Cartridge White/Gray

$100.10
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

#1738 panel bond adhesive is a 90 min, multi use glass sphere filled epoxy adhesive that provides a superior bond and seals that panel being bonded. The glass spheres in the product assist in obtaining the proper bond line thickness. #1738 is suitable for all non structural bonding applications of metal, aluminum, fiberglass and SMC, including door skins, roof skins, fenders, quarter panels, cab corners, and medium and large sized panels.

Why pros choose it

  • Cartridge fits guns recommended by most other industry leading brands in addition to Transtar's 4440 gun
  • Bonds and seals seams simultaneously
  • Easy to sand
  • High strength, high impact resistant bond
  • Built-in spacer (glass beads) to assist in obtaining proper bond line thickness
  • Use on a wide variety of substrates

How to Use

For all non structural bonding applications of metal, aluminum, fiberglass and SMC, including door skins, roof skins, fenders, quarter panels, cab corners and medium and large sized panels

Compatibility

Compatible substrates: Aluminum, Fiberglass, SMC.

Compatible paint systems: Epoxy.

Specifications

Technical specifications for TRANSTAR® 1738 Panel Bond Adhesive, 200 mL Cartridge, White/Gray, Liquid, 24 to 36 hr Curing
Part No. 1738
Product Line TRM
MFR Model 1738
Standard/Approvals California Pro65 Warning: Cancer
Application For all non structural bonding applications of metal, aluminum, fiberglass and SMC, including door skins, roof skins, fenders, quarter panels, cab corners and medium and large sized panels
Manufacturer Transtar Autobody Technology
UPC 845505005507
Brand TRANSTAR®
Applicable Materials Metal, Aluminum, Fiberglass and SMC
Composition 65 to 75% Bisphenol A/ Epichlorohydrin Resin, 10 to 20% Diglycidyl Ether Of Polypropylene Glycol, 3 to 6% Bisphenol A - CTBN Rubber Adduct, 1 to 3% Neopentyl Glycol Diglycidyl Ether, 1 to 3% 3-(2,3-Epoxypropoxy) Propyl Trimethoxysilane
Application Time 85 to 90 min
Odor/Scent Mild
Color White/Gray
Container Size (mL) 200
Flash Point >100 deg C
Container Type Cartridge
Form Liquid
Curing Time 24 to 36 hr

About Transtar Autobody Technology

Transtar Autobody Technology is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can this TRANSTAR product be used on?

this TRANSTAR product is compatible with Aluminum, Fiberglass, SMC. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.

What is the cure or dry time for this TRANSTAR product?

The curing time for this TRANSTAR product is 24 to 36 hr. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.

What size does this TRANSTAR product come in?

This listing ships this TRANSTAR product in a 200 container. Check the autofxmart catalog for other sizes and bulk pricing.

What is the manufacturer part number (MPN) for this TRANSTAR product?

The MPN for this TRANSTAR product is 1738. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

Documents & Safety

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean both surfaces to bare, dry substrate.
2Load the cartridge and fit the mixing nozzle.
3Apply an even bead (or clamp) where needed.
4Tool or smooth the joint before it skins over.
5Allow to cure fully before stressing or painting.
Specifications

Full data

BrandTranstar Autobody Technology
Part number1738
UPC845505005507
ApplicationFor all non structural bonding applications of metal, aluminum, fiberg
Size200 mL
ColorWhite/Gray
OriginUS
ConditionNew
Applicable MaterialsMetal, Aluminum, Fiberglass and SMC
SKUTRM.1738.EA
Frequently asked

Good to know

this TRANSTAR product is compatible with Aluminum, Fiberglass, SMC. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for this TRANSTAR product is 24 to 36 hr. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships this TRANSTAR product in a 200 container. Check the autofxmart catalog for other sizes and bulk pricing.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.