Transtar Autobody Technology
Transtar Autobody Technology 4663 2 in 1 Trim, 20 oz Aerosol Can, Gloss Black, 5 to 10 min Curing
No reviews yet
WARNING: Cancer & Reproductive Harm
California Pro65 Warning: Cancer and Reproductive Harm
Tap for details → P65Warnings.ca.gov
Authorized dealer
Ships today
30-day returns
Overview
Built for the job.
2-in-1 trim black is a tough, flexible polymer coating designed to restore bumpers and flexible or rigid trim to their OEM condition. Transtar offers 3 gloss levels, matte, satin and gloss, to match the appearance on most vehicles. It has excellent adhesion to urethane, rubber, metal and treated olefin plastics. It is…
TRANSTAR® 4663 is a 2-in-1 trim coating supplied in a 20 oz aerosol can, formulated for rapid gloss black finish on automotive trim components. The ready-to-spray formulation eliminates mixing steps and cures to touch within 5-10 minutes, allowing fast turnaround on repair or restoration projects.
Technical advantages include low VOC emissions at 2.86 lb/gal (342 g/L) and compatibility with a broad range of substrates-aluminum, e-coat, fiberglass, galvanized steel, OEM parts, plastics, primers, SMC, and standard steel. The aerosol delivery provides uniform coverage and the quick flash time of 97 °C (-142 °F) supports efficient workflow in body shops.
Safety considerations require strict PPE: eye protection, chemical-resistant gloves, protective clothing, and a respirator due to acute toxicity, carcinogenic potential, and flammable gas hazards. Use in a well-ventilated area and follow the SDS first-aid guidelines for inhalation, skin contact, and ingestion.
Why Pros Choose Transtar Autobody Technology TRM
- Fast drying and flexible
- Excellent adhesion on metal or plastic substrates
- Good corrosion resistance
- New spray tip gives better coverage
- Excellent flow and leveling
- Good hiding and coverage
How to Use
For use on metal or plastic surfaces
- Clean the substrate thoroughly and remove all contaminants; ensure the surface is dry.
- The product is supplied as an aerosol ready to spray-no mixing or pot life considerations are required.
- Apply a uniform first coat using conventional spraying techniques. Hold the can 6-8 in (15-20 cm) from the surface and use overlapping passes.
- Allow 5-10 min for flash cure before applying additional coats, if needed.
- Apply a second coat following the same method; subsequent coats are optional based on coverage requirements.
- After the final coat, allow at least 10 min of ambient curing before handling or re-coating.
Compatibility
Compatible substrates: Plastic.
Compatible paint systems: Urethane.
Specifications
| Part No. | 4663 |
|---|---|
| Product Line | TRM |
| MFR Model | 4663 |
| Standard/Approvals | California Pro65 Warning: Cancer and Reproductive Harm |
| Application | For use on metal or plastic surfaces |
| Manufacturer | Transtar Autobody Technology |
| UPC | 845505003091 |
| Brand | TRANSTAR® |
| Color | Black |
| Container Size (oz) | 20 |
| Finish | Gloss |
| Curing Time | 5 to 10 min |
| Mixing Ratio | RTU |
- Mix Ratio
- aerosol: ready to spray
- VOC
- 2.86 lb/gal (342 g/L)
- Shelf Life
- 1 year
- Cure Time
- 5-10 min
- Compatible Substrates
- aluminum, e-coat, fiberglass, galvanized, OEM, plastic, primer, SMC, steel
About Transtar Autobody Technology
Transtar Autobody Technology is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.
Frequently Asked Questions
What substrates can I apply TRANSTAR® 4663 2 in 1 Trim to?
The aerosol is compatible with aluminum, e-coat, fiberglass, galvanized steel, OEM finishes, plastic, primer, SMC (sheet molding compound), and regular steel.
How long does it take for the coating to cure?
The product cures in 5 to 10 minutes at ambient conditions.
What personal protective equipment is required when spraying this aerosol?
Use eye protection, chemical-resistant gloves, protective clothing, and a respirator approved for organic vapors and aerosols.
Can I sand or paint over the cured coating?
Yes. Once fully cured (5-10 min), the surface can be sanded or top-coated with compatible paints.
Documents & Safety
Danger - This aerosol contains toxic solvents and a carcinogenic component, and its vapors are flammable and can irritate eyes, skin, and the respiratory system. It is also classified as an oxidizer and poses reproductive and organ toxicity risks. Use eye protection, chemical-resistant gloves, protective clothing, and a suitable respirator when handling. Treat the container as compressed gas; avoid inhalation, ingestion, or skin contact. Always refer to the full SDS before use.
Why Buy from autofxmart
- Authorized distributor — authentic, factory-fresh stock.
- Fast US shipping — most orders ship within 1 business day.
- 30-day returns — buy with confidence.
- Pro-shop pricing — bulk discounts available on request.
- Expert support — questions? Email us at support@autofxmart.com.
How to apply
Steps
1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications
Full data
Frequently asked
Good to know
Transtar Autobody Technology TRM is compatible with Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
The curing time for Transtar Autobody Technology TRM is 5 to 10 min. Drying and curing times may vary with temperature, humidity, and film thickness — always consult the Technical Data Sheet (TDS) for exact cycle conditions.
This listing ships Transtar Autobody Technology TRM in a 20 (CN) container. Check the autofxmart catalog for other sizes and bulk pricing.
Transtar Autobody Technology TRM uses a mix ratio of RTU. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.
Most in-stock orders for Transtar Autobody Technology TRM ship the same or next business day from our US warehouse. Expedited options are available at checkout. Freight-class items may require an additional 1–2 days for carrier pickup.
What Our Customers Say
Thanks! Your review was submitted and will appear after moderation.
No reviews yet — be the first to review this product.
