Skip to content
Pro-grade auto-body supply · Any quantity
Pro-grade auto-body supply · Any quantity

Country

Business accountsNow openApply
Transtar Autobody Technology

Transtar 2K Epoxy Primer Sealer/Groundcoat Black - Part 6161 - 1 gal Can

$216.52
In stock
Shipping costs are shown at checkout. View shipping policy.
Freight item · $3,500 order minimum Oversized items ship by freight carrier only. We can only ship it on orders of $3,500 or more, where a $250.00 flat freight charge applies. Smaller orders will not show a shipping option at checkout.
Overview

Built for the booth.

2K epoxy primer sealer/ground coat is an exceptional lead and chromate free corrosion resistant coating with excellent adhesion on a variety of properly prepared surfaces. 2K epoxy primer sealer/ground coat improves adhesion of body fillers and resists moisture damage caused by water permeation. If further reduced, this product may be used as a pre-coat or sealer/ground coat prior to top coating.

Why Pros Choose Transtar Autobody Technology TRM

  • Exceptional adhesion and corrosion resistance over bare metal
  • Improves adhesion of body filler
  • Resists moisture damage caused by water permeation, when body filler is put over primers

Compatibility

Compatible substrates: Bare Metal, E-Coat, Epoxy Primer, Body Filler.

Compatible paint systems: Epoxy, 2K.

Specifications

Technical specifications for TRANSTAR® 6161 2K Epoxy Primer Sealer/Groundcoat, 1 gal Can, Black, 1:1:10 Mixing, 520 sq-ft/gal at 1 mil Coverage
Part No. 6161
Product Line TRM
MFR Model 6161
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm | GHS and OSHA Hazard
Manufacturer Transtar Autobody Technology
UPC 845505000779
Brand TRANSTAR®
Maximum Sale Quantity 2
Maximum Sale Day 7
Rubberized No
Solids Content 47.73%
Color Black
Container Type Can
Form Liquid
Container Size (gal) 1
Mixing Ratio 1:1:10

About Transtar Autobody Technology

Transtar Autobody Technology is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What surfaces can Transtar Autobody Technology TRM be used on?

Transtar Autobody Technology TRM is compatible with Bare Metal, E-Coat, Epoxy Primer, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.

What size does Transtar Autobody Technology TRM come in?

This listing ships Transtar Autobody Technology TRM in a 1 (GL) container. Check the autofxmart catalog for other sizes and bulk pricing.

What is the mix ratio for Transtar Autobody Technology TRM?

Transtar Autobody Technology TRM uses a mix ratio of 1:1:10. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.

What is the manufacturer part number (MPN) for Transtar Autobody Technology TRM?

The MPN for Transtar Autobody Technology TRM is 6161. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

Documents & Safety

Why Buy from autofxmart

Technical and safety documents

Get the mix right

Mix & coverage calculator

Locked to this product's ratio of 1:1:10 (clear : hardener).

Clearcoat to spray
5L
Your batch1:1:10
Clearcoat5
Hardener2.5 L
Ready to spray7.5 L
How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2–3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandTranstar Autobody Technology
Part number6161
UPC845505000779
Application2K epoxy primer sealer/ground coat is an exceptional lead and chromate
Size1
ColorBlack
OriginUS
ConditionNew
RubberizedNo
SKUTRM.6161.GL
Frequently asked

Good to know

Transtar Autobody Technology TRM is compatible with Bare Metal, E-Coat, Epoxy Primer, Body Filler. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships Transtar Autobody Technology TRM in a 1 (GL) container. Check the autofxmart catalog for other sizes and bulk pricing.
Transtar Autobody Technology TRM uses a mix ratio of 1:1:10. Always measure activators and reducers accurately to maintain film properties and pot life — deviating from the ratio can cause adhesion or curing problems.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet — be the first to review this product.