Skip to content
Pro-grade auto-body supply ยท Any quantity
Pro-grade auto-body supply ยท Any quantity

Country

Business accountsNow openApply
Transtar Autobody Technology

Transtar 1034 Mul-TIE Adhesion Promoter 1 qt Amber Liquid, Can

$48.24
In stock
Shipping costs are shown at checkout. View shipping policy.
Overview

Built for the job.

Transtar's Mul-TIE adhesion promoter greatly enhances the adhesion, appearance and durability of virtually all types of automotive finishes including problem plastics, such as TPO and polypropylene. Mul-TIE can be used under primers on flexible and rigid plastic parts, as a tie coat between fresh or existing primer and color (single stage or basecoat) and for painting aluminum or steel.

TRANSTARยฎ Mul-TIE 1034 is a liquid adhesion promoter supplied in a 1 qt amber can, designed to improve bond strength between primers, fillers and topcoats on a wide range of automotive substrates. It is typically applied as the first coat before filler or primer to ensure consistent wet-out and reduce flash time.

Key technical attributes include a low VOC rating of 4.78 lb/gal (573 g/L) and a shelf life of one year when stored unopened. The promoter works on aluminum, e-coat, fiberglass, galvanized steel, OEM panels, plastics, polyester, SMC, and standard steel surfaces. Application calls for two coats to achieve optimal adhesion across these substrates.

Safety is critical: the product carries a "Warning" signal word with acute toxicity, flammability, and carcinogenic hazards. Use appropriate PPE-eye protection, chemical-resistant gloves, protective clothing, and a respirator-and ensure adequate ventilation during handling.

Why Pros Choose Transtar Autobody Technology TRM

  • Eliminates the need for sanding of replacement plastic parts
  • Makes paint stick to flexible and rigid bumpers
  • An ideal tie coat for improving adhesion of topcoats to prepared original coating or primer
  • Provides outstanding adhesion of primer, paint and repair materials on plastic parts

How to Use

For use on bare steel, aluminum and galvanized , OEM finish and old paint work surfaces

  1. Thoroughly clean and dry the substrate (aluminum, e-coat, fiberglass, galvanized, OEM, plastic, polyester, primer, SMC, or steel) to remove all contaminants.
  2. Apply the first coat of Transtar Mul-TIE 1034 adhesion promoter uniformly using a spray gun or brush.
  3. Allow the first coat to flash/dry as required by ambient conditions, then apply the second coat over the same area.

Compatibility

Compatible substrates: Steel, Aluminum, Plastic.

Compatible paint systems: Basecoat.

Specifications

Technical specifications for TRANSTARยฎ Mul-TIE 1034 Adhesion Promoter, 1 qt Can, Amber, Liquid
Part No. 1034
Product Line TRM
MFR Model 1034
Standard/Approvals California Pro65 Warning: Cancer and Reproductive Harm
Application For use on bare steel, aluminum and galvanized , OEM finish and old paint work surfaces
Manufacturer Transtar Autobody Technology
Trade Mark Mul-TIE
UPC 845505001707
Brand TRANSTARยฎ
Rubberized No
Color Amber
Container Size (qt) 1
Container Type Can
Form Liquid
VOC
4.78 #/gal (573 g/L)
Shelf Life
1 year
Substrates
Aluminum, e-coat, fiberglass, galvanized, OEM, plastic, polyester, primer, SMC, steel
Coats
2

About Transtar Autobody Technology

Transtar Autobody Technology is a trusted manufacturer of professional auto body and refinish products used by collision repair shops and restoration specialists across North America.

Frequently Asked Questions

What substrates are compatible with TRANSTARยฎ Mul-TIE 1034?

The adhesion promoter can be applied to aluminum, e-coat, fiberglass, galvanized steel, OEM panels, plastic, polyester, primer, SMC, and standard steel surfaces.

How many coats should I apply?

Apply two coats for optimal adhesion.

What personal protective equipment is required when using this product?

Wear eye protection, chemical-resistant gloves, protective clothing, and a respirator as specified in the SDS.

Can I sand or paint over the promoter after it cures?

Yes. After the recommended two coats have cured, the surface can be sanded and primed/painted according to normal body shop procedures.

Documents & Safety

The product-specific safety summary is pending verification. Read the applicable manufacturer Safety Data Sheet (SDS) and product label before use.

Why Buy from autofxmart

Technical and safety documents

How to apply

Steps

1Clean and degrease the surface, then scuff as needed.
2Mask off surrounding panels and trim.
3Mix to the product's ratio and strain.
4Apply 2โ€“3 even coats, flashing between each.
5Let cure fully before sanding, buffing, or assembly.
Specifications

Full data

BrandTranstar Autobody Technology
Part number1034
UPC845505001707
ApplicationFor use on bare steel, aluminum and galvanized , OEM finish and old pa
Size1
ColorAmber
OriginUS
ConditionNew
Trade MarkMul-TIE
SKUTRM.1034.QT
Frequently asked

Good to know

Transtar Autobody Technology TRM is compatible with Steel, Aluminum, Plastic. Always ensure the surface is properly cleaned, degreased, and sanded before application to achieve the strongest adhesion and a professional finish.
This listing ships Transtar Autobody Technology TRM in a 1 (QT) container. Check the autofxmart catalog for other sizes and bulk pricing.
The MPN for Transtar Autobody Technology TRM is 1034. Use this number when cross-referencing against TDS, SDS, or legacy supplier catalogs.

What Our Customers Say

Thanks! Your review was submitted and will appear after moderation.

No reviews yet โ€” be the first to review this product.